![]() |
#4
|
||||
|
||||
![]() Thanks guys, got how to insert the pics! Looks like I may need to resize them though, kind of big... well something to do later I guess.
So here's the equipment I have so far... some of you may recognize various pieces. In collecting this stuff I had the pleasure of meeting many of you in person and oogling your tanks, which just fueled my obsession, err, interest in this great hobby. The tank: 72L x 19W x 20T (but the bottom is raised so it's more like 19T). It's sitting on two 0.5 inch plywood boards which sit on a steel stand. The person I bought the stand from did a really good job cleaning it up as it was starting to rust so I had little sanding to do then painted it with Tremclad rust paint (black gloss). Two half inch boards were used as to avoid warping, but maybe I should use a one inch board instead? what do you think? ![]() The sump, it's a 40g breeder, which may be too small... I was originally going to use the MCE600 as it is rated to 190g, and to use most of the sump as a large refugium, but I got a really good deal on another skimmer... It's been sitting in that corner since last spring so stuff has slowly been piling up on it. ![]() The aforementioned skimmer... BK Supermarin 250 Internal ![]() ![]() My calcium reactor with second stage and CO2 tank. Um, does anyone know how to set this up? I picked this set up at the end of 2008 and I don't remember what goes where! When the time comes maybe someone can lend a hand? ![]() Anyhow, the plan for this weekend is to get some more plumbing, remove the top black tank trim and get some wood sealant. |