Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 10-16-2009, 03:04 AM
golf nut golf nut is offline
Member
 
Join Date: Feb 2004
Location: just north of Toronto
Posts: 454
golf nut is on a distinguished road
Default

Quote:
Originally Posted by Mr OM View Post
the fact is in general you feel 10x is the acceptable rate and I believe the slower rate to be better and I will explain.

Quote:
Originally Posted by sphelps View Post
Really? I'm pretty sure I made it clear from the start, even in the thread this discussion started in.....


Are you sure that's what you said? and that you were not biased for 10x sump returns?


Quote:
Originally Posted by sphelps
The 10X turn over recommendation is based on tank/sump flow and not skimmer flow

Quote:
Originally Posted by sphelps
Basically I think it's fairly obvious that more return flow means more filtration.

Quote:
Originally Posted by sphelps
higher return flow will not only keep particles and matter suspended but it will also filter them out faster.

Quote:
Originally Posted by sphelps
I prefer to practice around 10x turnover with additional in tank flow if required

Quote:
Originally Posted by sphelps
My way of thinking is to start with the minimum requirement, which I believe is about 10x, then supplement more if needed and of course only if it’s practical. Remember I’m not arguing the fact that 3-5x won’t work but rather than running 10x will also work, personally I believe it may work slightly better but that’s not my main argument.

Quote:
Originally Posted by sphelps
One more reason I see more being better is matching the flow doesn't actually make sense if you look at the numbers. My skimmer for example flows 4000L/h and it's rated for tanks up to 3000L, hmmm so the "required" flow results in a turn over of 1.3

Quote:
Originally Posted by sphelps
I believe it's actually just over 10x
Reply With Quote
  #2  
Old 10-16-2009, 03:25 AM
golf nut golf nut is offline
Member
 
Join Date: Feb 2004
Location: just north of Toronto
Posts: 454
golf nut is on a distinguished road
Default

10x flow rates through sump..

Due to the large flow rate through the sump to the tank the water flowing through the overflow box creates it's own surface flow towards the overflow box, this is likely the original reason for such high return rates The issue with this method is that when only 2 or 3 x rates are required using 10x or greater pulls more than just the surfactants
from the tank but also a large percentage of non contaminated water which changes the surfactants properties from a concentrated to a diluted solution.

It causes drain issues which if understood could easily be resolved, it enhances micro bubbles in the sump, requires the need for a more expensive pump with high running costs.

Most if not all skimmer manufactures suggest it makes the skimmer less effective.





low flow rates through sump ie from 1x to 3x..

Providing flow is configured correctly the low flow rate will remove surfactants in concentrated form, it will make the skimmer more effective, reduce the need for large overflow systems,reduce the cost of the return pump, reduce the operating costs of the return pump, eliminate micro bubbles, reduce noise and heat.
Reply With Quote
  #3  
Old 10-16-2009, 03:39 AM
sphelps's Avatar
sphelps sphelps is offline
Member
 
Join Date: May 2006
Location: Lyalta, East of Calgary
Posts: 4,777
sphelps is on a distinguished road
Default

Quote:
Originally Posted by Mr OM View Post
Are you sure that's what you said? and that you were not biased for 10x sump returns?
Really? Are you serious? Most of those are even out of context and in the rest I even stated it's my preference or my belief or my opinion. I'm pretty sure I'm allowed to have a preference and the fact that my preference is around 10x was always made perfectly clear. Yes I provided some reasoning which focused on my preference because others had already covered reasoning for there preferences.

If we can't share our opinions, experience and ideas why are we hear? You actually took the time to search through all my posts and quote only the particular parts (out of context) for the sole purpose to prove me wrong and accuse me of saying something different. I'm sorry but I'm not going to feed your need to debate and argue anymore. Find someone else to stroke your ego.
Reply With Quote
  #4  
Old 10-16-2009, 03:49 AM
golf nut golf nut is offline
Member
 
Join Date: Feb 2004
Location: just north of Toronto
Posts: 454
golf nut is on a distinguished road
Default

Quote:
Originally Posted by sphelps View Post
Really? Are you serious? Most of those are even out of context and in the rest I even stated it's my preference or my belief or my opinion. I'm pretty sure I'm allowed to have a preference and the fact that my preference is around 10x was always made perfectly clear. Yes I provided some reasoning which focused on my preference because others had already covered reasoning for there preferences.

If we can't share our opinions, experience and ideas why are we hear? You actually took the time to search through all my posts and quote only the particular parts (out of context) for the sole purpose to prove me wrong and accuse me of saying something different. I'm sorry but I'm not going to feed your need to debate and argue anymore. Find someone else to stroke your ego.
I simply quoted where you suggested that 10x was the magic number, not one of these quotes was out of context, the very fact that you disagree with me confirms the fact that you subcribe to higher than lower flow.
Reply With Quote
  #5  
Old 10-16-2009, 04:09 AM
mr.wilson mr.wilson is offline
Member
 
Join Date: Oct 2009
Location: Toronto
Posts: 205
mr.wilson is on a distinguished road
Default

I will be the first to admit I enjoy playing the devils advocate. A debate or discussion doesn't have to be an argument. As long as you present your position with some substance you can't possibly be wrong, just different. There's also no reason why you have to follow my advice even if it is valid. I've used oversized, less efficient equipment just because it works out that way sometimes.

There are many contradictions in the reef hobby. I've run skimmerless tanks, tanks with no water changes, closed loop (pressurized) filtration systems, and experiments with every method that warranted the effort. Some work better than others, but they all work. I've done more than a few 180's, but I always admit it when I do it. I'm willing to take or at least consider advice from the bottom or top of the hobby.

You have the right to disregard information, but you can't dispute it with hollow claims for 50 posts then try to back peddle that you never said any of it.

I'm sure this thread has been interesting reading and a great soap opera for all that are following. Three people in the aquarium trade having a heated argument about a simple subject. Everyone is going to think it was staged

I think this particular horse is sufficiently flogged. If someone wants to discuss the merits of water changes in a new thread, I'm there. I'll even take "against"
Reply With Quote
  #6  
Old 10-16-2009, 04:27 AM
golf nut golf nut is offline
Member
 
Join Date: Feb 2004
Location: just north of Toronto
Posts: 454
golf nut is on a distinguished road
Default

Quote:
Originally Posted by mr.wilson View Post
If someone wants to discuss the merits of water changes in a new thread, I'm there. I'll even take "against"
I would rather discuss the merits of not having teeth in an overflow box
Reply With Quote
  #7  
Old 10-16-2009, 06:32 AM
hillegom hillegom is offline
Member
 
Join Date: Nov 2008
Location: Surrey
Posts: 1,998
hillegom is on a distinguished road
Default

Quote:
Originally Posted by Mr OM View Post
I would rather discuss the merits of not having teeth in an overflow box
Because you imply that teeth are not good.
So I am wondering why are they not?
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 07:14 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.