Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 09-24-2009, 10:09 PM
mseepman mseepman is offline
Gold Member
 
Join Date: Aug 2007
Location: Vernon
Posts: 2,529
mseepman is on a distinguished road
Default

I concur with Sphelps...but you can also get replacement fans from Coralife and it will probably be quiet for a while before it too gets noisy.

If you go with the PC fan option, there are several good fans out there that are really quite quiet. You could also put more than one fan in as I found multiple spots when I opened my fixture. Since you have to re-wire the DC fan in anyway, doing two is just as easy.
__________________
Mark...



290g Peninsula Display, 425g total volume. Setup Jan 2013.
Reply With Quote
  #2  
Old 09-24-2009, 10:12 PM
globaldesigns's Avatar
globaldesigns globaldesigns is offline
Member
 
Join Date: Mar 2008
Location: Calgary, AB
Posts: 1,863
globaldesigns is on a distinguished road
Default

I agree, replace the fan...

I have the same unit, and mine is quite, I don't hear a thing. You can go to Memory Express (2 locations in Calgary) and get one there, most likely will be under $10

Your old one, the bearings are probably worn out or faulty.
__________________



Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite)
Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker
Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO)
Type of Aquarium: mixed reef (SPS & LPS) with fish
Dosing: Mg, Ca, Alk

Last edited by globaldesigns; 09-25-2009 at 03:55 AM.
Reply With Quote
  #3  
Old 09-25-2009, 12:38 AM
hillegom hillegom is offline
Member
 
Join Date: Nov 2008
Location: Surrey
Posts: 1,998
hillegom is on a distinguished road
Default

Idon't know how these fans look, But I had a computer fan that started to make noise.
I peeled the decal off of one side, and put a drop of thin machine oil onto the bearing.
It would stay quiet for about 2 months and then I would have to repeat.
Any thin oil would work. All depends on the condition of the bearing. It does not take much oil!
Reply With Quote
  #4  
Old 09-25-2009, 03:56 AM
globaldesigns's Avatar
globaldesigns globaldesigns is offline
Member
 
Join Date: Mar 2008
Location: Calgary, AB
Posts: 1,863
globaldesigns is on a distinguished road
Default

Quote:
Originally Posted by hillegom View Post
Idon't know how these fans look, But I had a computer fan that started to make noise.
I peeled the decal off of one side, and put a drop of thin machine oil onto the bearing.
It would stay quiet for about 2 months and then I would have to repeat.
Any thin oil would work. All depends on the condition of the bearing. It does not take much oil!
Many fans have sealed bearings, so I wouldn't recommend oil, as it may not work well, but also hat oil could get into your tank. Fans are cheap, so I would just replace
__________________



Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite)
Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker
Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO)
Type of Aquarium: mixed reef (SPS & LPS) with fish
Dosing: Mg, Ca, Alk
Reply With Quote
  #5  
Old 09-25-2009, 04:46 AM
mseepman mseepman is offline
Gold Member
 
Join Date: Aug 2007
Location: Vernon
Posts: 2,529
mseepman is on a distinguished road
Default

I agree...oil is just too risky.
__________________
Mark...



290g Peninsula Display, 425g total volume. Setup Jan 2013.
Reply With Quote
  #6  
Old 09-25-2009, 05:09 AM
hillegom hillegom is offline
Member
 
Join Date: Nov 2008
Location: Surrey
Posts: 1,998
hillegom is on a distinguished road
Default

You certainly do not want oil to fall into the water. That is why I said just a little. You could always put oil onto a toothpick and apply it like that.
But you are right, these computer like fans are cheap. And that is why you won't find any with sealed bearings
Reply With Quote
  #7  
Old 09-25-2009, 03:41 PM
globaldesigns's Avatar
globaldesigns globaldesigns is offline
Member
 
Join Date: Mar 2008
Location: Calgary, AB
Posts: 1,863
globaldesigns is on a distinguished road
Default

Quote:
Originally Posted by hillegom View Post
You certainly do not want oil to fall into the water. That is why I said just a little. You could always put oil onto a toothpick and apply it like that.
But you are right, these computer like fans are cheap. And that is why you won't find any with sealed bearings
All the fans I have ever purchased are sealed, and over the years I have bought many as I own a web hosting company and have a half decent sized data centre so keeping fans on stock is always necessary... Go to Memory Express, get a Sunon fan, they are the best and will cost you about $10-15 for the one that fits the canopy.
__________________



Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite)
Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker
Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO)
Type of Aquarium: mixed reef (SPS & LPS) with fish
Dosing: Mg, Ca, Alk

Last edited by globaldesigns; 09-25-2009 at 03:43 PM.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 08:12 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.