![]() |
|
#1
|
|||||
|
|||||
![]() LIGHTS… ACTION… Aquarium!
![]() I know my mom didn’t want too difficult of things to look after for corals so decided to go for T5’s Got a great deal from Wendell at OA on a nice set 4 bulb unit (2 10K & 2 actinic) Measured out where the middle was going to be and then had to figure out to get the lights out there. One day I was wandering around Home Depot in the gardening section and found these… ![]() Measuring them out the dropped an inch short of where I wanted to, so now I use the extra wood you saw before. With a quick plumbing for vertical off we go… ![]() With the 2 brackets in place my dad and I mounted the hangers. The first one… ![]() And the finished product. ![]() We hung the light and plugged it and what do you know… ![]() It lit up and didn’t fall down as shown by my daughter. ![]()
__________________
Enquiring minds want to know… ![]() |
#2
|
||||
|
||||
![]() Hey Good idea with the plant hangers. I can't tell but are you able to lift the light fixture up on those hanging cables? That is always helpful when you want to work in the tank.
I too am using a squid in my nano tank and I can attest to the "whack" theory. I've been running mine for a year now and only had to "whack" it twice for noise (not because it stopped).
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |