sump question & suggestions

[wickedfrags]

A pretty nice looking little sump, and acrylic to which is nice.

What specifically are you unhappy with?

Just based on the pictures, a couple things you could consider:

1. If you are having trouble with micro-bubbles being drawn into the display becuase of the skimmer, consider installing a baffle or two maybe 6-8" in front of your return pre-filter (just enough room to get your hand in there easily to remove it for cleaning). Make sure the baffle(s) has ample clearance so the water travels slowly and the water goes under the baffle.

2. Get yourself a little macro algae and light for the sump, promotes pod life in the sump and on a reverse-daylight schedule assists in stabilizing your pH.

Other than that, well you cold consider using some micro bags to keep the sump clean, but overall the set-up looks pretty good. Cheers.

[Navarchus]

Off subject:
Your skimmer isn’t properly tuned.

[bleevin]

Originally Posted by mark

Looks totally functional. Any problems with microbubbles from the skimmer back to the display?

About my only negative comment is it's difficult to siphon out the detritus that settles out through all the LR (running LR and rubble so know from experience)

Hmmm never considered that... but so far I don't think i have a problem with microbubbles...

Originally Posted by wickedfrags.com

A pretty nice looking little sump, and acrylic to which is nice.

What specifically are you unhappy with?

Just based on the pictures, a couple things you could consider:

1. If you are having trouble with micro-bubbles being drawn into the display becuase of the skimmer, consider installing a baffle or two maybe 6-8" in front of your return pre-filter (just enough room to get your hand in there easily to remove it for cleaning). Make sure the baffle(s) has ample clearance so the water travels slowly and the water goes under the baffle.

2. Get yourself a little macro algae and light for the sump, promotes pod life in the sump and on a reverse-daylight schedule assists in stabilizing your pH.

Other than that, well you cold consider using some micro bags to keep the sump clean, but overall the set-up looks pretty good. Cheers.

I always thought an optimal sump would be one with more baffles, refugium etc. My original message was placed in the Vancouver - BC section more to find someone who has worked with acrylic and was willing to help modify the sump for cash.

I have cheato in there but haven't setup a light for reverse schedule.

Originally Posted by Navarchus

Off subject:
Your skimmer isn’t properly tuned.

I kinda thought that was the case. I can't get any skimmate from it. I've gone from opening full to closed full and not sure what I'm doing wrong. Not high enough water line in the sump?

Thanks for all the replies everyone. Keep them coming pls

[Doug]

Originally Posted by bleevin

I always thought an optimal sump would be one with more baffles, refugium etc. My original message was placed in the Vancouver - BC section more to find someone who has worked with acrylic and was willing to help modify the sump for cash.

I assumed you were looking for more sump info after posting pics, etc. Thats why I moved it here for you, so more would have a look.

Please feel free to ask for someone local, for acrylic help in the local forum if you so wish or I could move that part back.

[Navarchus]

Try to get the bombardment area between the base of the collection cup to the lower half of the inner collection cup reaction tube.

[bleevin]

Originally Posted by Navarchus

Try to get the bombardment area between the base of the collection cup to the lower half of the inner collection cup reaction tube.

I'm sorry I don't quite understand. I can't adjust anything besides the amount of air going into the system.

[bleevin]

Originally Posted by Doug

I assumed you were looking for more sump info after posting pics, etc. Thats why I moved it here for you, so more would have a look.

Please feel free to ask for someone local, for acrylic help in the local forum if you so wish or I could move that part back.

No problem thanks for the move. I was considering putting it in this section.

[Navarchus]

Sorry we are going of topic....

Any way did you buy it with the pump? or did you match the pump by yourself?

try to install a ball tap on the outlet

[bleevin]

Originally Posted by Navarchus

Sorry we are going of topic....

Any way did you buy it with the pump? or did you match the pump by yourself?

try to install a ball tap on the outlet

I got the pump with the skimmer. I was told that the skimmer is a kzs revolution skimmer. I've looked online for the instructions for it but couldn't find it.

[Navarchus]

That is correct it’s a KZ revolution skimmer.
I assume its second hand?
What are the skimmer dimensions?
What pump is it (brand and gph)

The KZ skimmers are a Becket style skimmer. You should clean the injector frequently