|
|
|
|
|
#1
08-19-2009, 01:26 AM
|
|||||
|
|||||
Quote:
But, like everytihng else, It is hard to compete with the Chinese import parts. Not much market in the "toy" department for really high end stuff.
__________________
Dan Pesonen Umm, a tank or 5 
|
|
#2
08-19-2009, 02:11 AM
|
|||||
|
|||||
|
Reasonably priced kits to build another CNC
 There's most of the bits n pieces in the garage for mine (just need the motors & drives) - 24x24 cutting area sliding gantry (3" channel construction), 4hp plunge router, skate bearing on angle slides; 1" acme screws... Yes I believe in overbuilding  Unfortunately thats why it sits without electrics... Cuz I haven't found anything I can afford to drive the darn thing...My .02 - Rebuild your CNC out of something water resistant... Add a water feed and a good quality diamond bit... NanoReefers seem to be willing to pay ridiculous $ for custom built tanks. Having those nice CNC cuts (use the right bit and your edges come out almost polished) and doing professional silicone work - takes a while to build up your rep - but in time could lead to an eventual semi-steady income...
__________________
By reading, replying to, commenting about, or in any way accessing the material in this post; including but not limited to storing in a database, retrieving from a database, viewing in a web browser, including it in or making a reference to it in a legal document, or accidentally glancing at it you agree to send me $100.
|
|
#3
08-19-2009, 02:30 AM
|
|||||
|
|||||
|
CNC nano tanks huh? Hmm. My mill is waterproof. I use a constant spray on the cutting tool. I just cant see the cost effectiveness of CNC cutting glass, just for a polished edge? Now, glass overflows.. I've allways wanted a full length CNC table, but never had the room
__________________
Dan Pesonen Umm, a tank or 5
|
|
#4
08-19-2009, 02:55 AM
|
|||||
|
|||||
|
Look at the rave reviews elite gets for his tank/sumps - those are all cut with CNC... It's the clean edges, smooth transitions (cuts you can't get with a scriber), accurate positions on the bulkhead sites - then add in the professional assembly, that's why he gets sales he does... There are lots of nice cuts you can do with a CNC you can't do scribing/breaking...
You've probably tried to add eggcrate to your own overflow top - take a hunk of glass, and draw yourself a nice slotted screen for the top of that glass - then ask yourself if you'd rather that or black eggcrate siliconed onto the top
__________________
By reading, replying to, commenting about, or in any way accessing the material in this post; including but not limited to storing in a database, retrieving from a database, viewing in a web browser, including it in or making a reference to it in a legal document, or accidentally glancing at it you agree to send me $100.
|
|
#5
08-19-2009, 03:07 AM
|
||||
|
||||
|
Volute covers to convert a Laguna/askoll pump into a skimmer pump are going for $149 US a piece with a pinwheel. Check Marine Solutions. Apparently the Laguna is similar to the Red Dragon. I'm in the market for one of the converted Askoll pumps myself to replace the Sicce on my skimmer.
|
|
#6
08-19-2009, 03:25 AM
|
|||||
|
|||||
|
Hmm, have to look into these pumps, Thats somehting I could get into making. Where can a guy get one?
__________________
Dan Pesonen Umm, a tank or 5
|
Hybrid Mode
