![]() |
#1
|
|||||
|
|||||
![]() Who would of thought a 20.00 tank was tempered...now I gotta clean it up
![]() Last edited by fencer; 08-02-2009 at 12:03 AM. |
#2
|
|||||
|
|||||
![]()
__________________
225g reef |
#3
|
||||
|
||||
![]() What is the pink circle in the middle?
|
#4
|
|||||
|
|||||
![]() Putty dam to hold water while drilling
|
#5
|
||||
|
||||
![]() Don't give up yet, carefully remove top and bottom plastic frames, get a new glass cut and silicone it in
|
#6
|
|||||
|
|||||
![]() oops
|
#7
|
|||||
|
|||||
![]() I am not sure it would be worth the trouble for the cost of that tank?
|
#8
|
|||||
|
|||||
![]() I am not sure about the cost....might be cheaper to buy ordinary glass and do some bracing
|
#9
|
|||||
|
|||||
![]() Aww, dude that sucks. Probably cheaper to buy a new tank, but go with a thicker glass for that panel if you decide to replace it so you don't have to brace it. Braces are such a pain...
__________________
Calvin --- Planning a 29 gallon mixed reef... |
#10
|
|||||
|
|||||
![]() Shitty, but 20 gal longs are usually tempered, standard 20 gals are not.
If you replace the back you won't be able to use thicker glass if you want the black trim to fit. And the same thickness untempered with a hole won't be strong enough. |