kien's 150g Room Divider Mixed Reef & Stuff

kien · #1 07-29-2009, 09:14 PM

So I am having a heck of a time trying to decide what to do about my flow..

I know that at the end of the tank where the returns are I am going to put at least one koralia 4 in a corner and direct the flow diagonally into the tank. What I can't decide on is what to do at the other (overflow) end of the tank. I want to use one or two Votech mp40s but I only have 3 inches of clearance on either side of my overflow box. This means that if I were to install a Vortech it is going to have to sit right beside the side panes of glass with its flow blasting down the sides of the glass as illustrated below..

My concern is whether or not I am going to get enough flow through the centre of the tank. Tank is 24" wide. If I used Koralias I could easily point them more towards the centre of the tank. I don't want to put a vortech at the other end of the tank because this is a peninsula viewable on 3 sides. A koralia at that end I can tuck away in a corner but a vortech.. probably not.

JDigital · #2 07-29-2009, 09:57 PM

I think you above illistration will work just fine... why? because I assume most of your rockwork with be down the middle of the tank, so unless you want direct flow blasting your rockwork/corals at that end of the tank, I think you will be just fine with 2x mp40's positioned like your pic. Remeber Vortechs have a nice wide flow pattern... plus you will have your 2 returns (which I assume are adjustable for direction) and the K4 at the other end of the tank, which you could mount in the middle...

Piscez · #3 07-30-2009, 12:43 AM

Don't worry about the flow with the MP40W's the control you get has a very broad range to suit almost anyone's needs. I have a single in my 72 bow in short pulse mode at approx 50% power I'm generating a 2" wave and it's aimed directly at my rock work. The width field on the MP40W's is amazing,

BTW your setup is looking really good! nice pics.

Navarchus · #4 07-30-2009, 03:22 AM

I think you should go with a couple of Tunze 6105 and the new 7096
I had them and I was very satisfied, I can’t tell the same on my couple of mp40 gen2, noisy and unreliable

JDigital · #5 07-30-2009, 03:27 AM

I don't understand when people say Vortechs are noisy?? I have one in my bedroom and I can never hear it...

Navarchus · #6 07-30-2009, 04:46 AM

how long do ypu have it?

xtreme · #7 07-30-2009, 04:57 AM

Quote:

Originally Posted by JDigital

I don't understand when people say Vortechs are noisy?? I have one in my bedroom and I can never hear it...

Not saying I don't like them, but I can definitely hear them. What mode do you have yours on? I have one on Reef Crest and one on Lagoon and I can sure hear them ramp up. I have also run into the reliability issue recently...

JDigital · #8 07-30-2009, 12:30 PM

Quote:

Originally Posted by xtreme

Not saying I don't like them, but I can definitely hear them. What mode do you have yours on? I have one on Reef Crest and one on Lagoon and I can sure hear them ramp up. I have also run into the reliability issue recently...

I run reef crest at 100%. But only an mp20