Dez' Tank Journal

lastlight · #1 07-04-2009, 06:28 AM

So is Wavysea still in business? I was reading on the other forum maybe a year ago that the maker was basically MIA and wasn't answering the phone anymore etc.

I was dead-set on using a pair of them until I read this. Please keep us posted on your experience with it. My eurobrace holes were driled with these units in min and if what you say is true about improvements being made then perhaps Wavysea is alive and well now.

Still can't get over your dremelled glass bracing. You're a DAREDEVIL.

Dez · #2 07-04-2009, 01:29 PM

Quote:

Originally Posted by lastlight

So is Wavysea still in business? I was reading on the other forum maybe a year ago that the maker was basically MIA and wasn't answering the phone anymore etc.

I was dead-set on using a pair of them until I read this. Please keep us posted on your experience with it. My eurobrace holes were driled with these units in min and if what you say is true about improvements being made then perhaps Wavysea is alive and well now.

Still can't get over your dremelled glass bracing. You're a DAREDEVIL.

I have no idea if they are still in business. The website doesn't work, but a couple of months ago it worked. J&L has it on a good sale so I though I'd try it. Mike said that it worked well except the bug of it going 360 if the power went out, but I was willing to fiddle with it. But when power goes out it just stops, and when it kicks back on it stays stopped, so that's fine by me.

It was tough finding reviews online because there weren't that many out there. The few reviews I found were mostly positive and people that were amazed. I am super happy with it. Very easy to set. I love the controllable speed etc. It is DEAD silent! I was going to go with a Sea swirl but the guy I was going to buy one from used decided not to sell. As you can see, I'm trying to get as much random flow in this tank as possible. So I'm happy for now and I couldn't resist when I saw the sale J&L had.

The OM 4way, combined with the external Wavebox and the WavySea is awesome.

Regarding the glass bracing - I'll have to correct you. It was a GRINDER that I used

. I think that deserves more of a daredevil title. Overall, cutting that glass brace out after the 4 holes were drilled took only about 10 minutes. It was fast.

So I hope this helps with your wavysea decision.

StirCrazy · #3 07-04-2009, 01:59 PM

Quote:

Originally Posted by Dez

Regarding the glass bracing - I'll have to correct you. It was a GRINDER that I used

. I think that deserves more of a daredevil title. Overall, cutting that glass brace out after the 4 holes were drilled took only about 10 minutes. It was fast.

So I hope this helps with your wavysea decision.

did you do like I did after you cut the bracing out.. slowly fill the tank and check the long sides with a strat edge to see how much it bowed..

I was pretty nervous at first but I figured I could live with a 1/64th of an in overall deflection in the tank.

Steve

Dez · #4 07-04-2009, 02:09 PM

Actually Steve, the funny thing is I cut out the glass brace so long ago that I didn't even think about it when I was filling the tank. I was quite confident that the glass brace would be fine though. I will however be careful of heat from lights. I don't think that there is any deflection at all, so I'm good to go for now.

Skimmerking · #5 07-04-2009, 02:54 PM

so you are saying that the wavy sea doesn't spin around after the power went out or they got unplugged , may be mine was a defective one maybe... well that is great for you

Dez · #6 07-04-2009, 04:47 PM

Quote:

Originally Posted by asmodeus

so you are saying that the wavy sea doesn't spin around after the power went out or they got unplugged , may be mine was a defective one maybe... well that is great for you

Yup, once unplugged, it just stops where it is. When plugged back in, it doesn't move at all. Just stays where it is.

xtreme · #7 07-04-2009, 03:03 PM

Quote:

Originally Posted by Dez

It was a GRINDER that I used

. I think that deserves more of a daredevil title. Overall, cutting that glass brace out after the 4 holes were drilled took only about 10 minutes. It was fast.

Thanks to this thread, I had the guts to take the grinder to my sump to mod it a bit. You're right, it did go really fast and I couldn't believe how easy it was. Thanks again for the idea.

Dez · #8 07-04-2009, 04:49 PM

Quote:

Originally Posted by xtreme

Thanks to this thread, I had the guts to take the grinder to my sump to mod it a bit. You're right, it did go really fast and I couldn't believe how easy it was. Thanks again for the idea.

I'm glad, the first time I tried I was a little nervous. I was grinding out my external overflow slot and that piece of glass is pretty important I'd say. With the brace, if it broke, then I would just have to eurobrace. But I got the best of both worlds I'd say.

StirCrazy · #9 07-04-2009, 11:47 PM

Quote:

Originally Posted by Dez

I'm glad, the first time I tried I was a little nervous. I was grinding out my external overflow slot and that piece of glass is pretty important I'd say. With the brace, if it broke, then I would just have to eurobrace. But I got the best of both worlds I'd say.

hey Dez, what kinda grinder did you use?

Steve

Dez · #10 07-05-2009, 03:49 AM

Quote:

Originally Posted by StirCrazy

hey Dez, what kinda grinder did you use?

Steve

Hey Steve,

I believe it was a 4" Dewalt Grinder, might have been 4 1/2". I used the thinnest diamond blade that I could find at Home Depot, the blade itself was about $10 I think. Well worth it.