Grainy photos and troubles in macro

[fkshiu]

Phhhphtt, iPhoto is where it's at. Came right on my iMac which Steve Jobs personally built and delivered to my door in between organ transplants.

[Snaz]

http://www.gimp.org/

"GIMP is the GNU Image Manipulation Program. It is a freely distributed piece of software for such tasks as photo retouching, image composition and image authoring. It works on many operating systems, in many languages..."

I have been using GiMP more and more instead of Photoshop these days. If you know PS then the transition can be tough but a newbie should be able to pick it up easily.

[Myka]

Thanks for all the ideas! I installed the software from my camera, and it really sucks. Or maybe I didn't figure it out...

One of my problems is that no matter what settings I try on Manual Mode the pics are super super dark, so i set ISO at 800 and then it's "normal" brightness, but pixelated. I tried somemore photos and got the best ones just setting everything on auto. Of course... *rolls eyes*

I will try some of these other programs. Thanks!

[Snaz]

Originally Posted by Myka

One of my problems is that no matter what settings I try on Manual Mode the pics are super super dark, so i set ISO at 800

ISO 800 is your problem.. Find some other combination that will bring the ISO down to 400 or less.

[RuGlu6]

Originally Posted by Myka

Thanks for all the ideas! I installed the software from my camera, and it really sucks. Or maybe I didn't figure it out...

One of my problems is that no matter what settings I try on Manual Mode the pics are super super dark, so i set ISO at 800 and then it's "normal" brightness, but pixelated. I tried somemore photos and got the best ones just setting everything on auto. Of course... *rolls eyes*

I will try some of these other programs. Thanks!

If you on manual mode make sure your "F" is wide open at say 2.7 and shutter is not slower then 1/60 if it is slower then use tripod.

Or instead of manual try aperture priority mode and just set on the lowest value i.e. widest opening, you will get nice small depth field and subject will stand out.

[Myka]

I actually just found this "F" adjustment, and did shift it to wide open although it doesn't say a number it is set at. I also cannot find a shutter speed...I will look through the camera manual. I have been playing with the aperture priority mode as well, and find I get some half decent pics with that setting.

This graininess is driving me nuts. From my understanding, this is a decent camera, but I got better pics with my Canon SD500 until I dropped it when I was rappelling.

I will try some of these new settings when the lights come on the tank in 1/2 hour. Thanks for your continued help!!

[sphelps]

I have a G9 and I find it works really well. You should be shooting in aperture priority mode with the lowest number possible (your f number) and keep the ISO low. Either 100 or 200 at the most, those little compacts don't have a large enough sensor to go much higher than that. If the picture is too dark try adjusting your exposure to the plus side which will slow the shutter speed so you might need a tripod or something steady. Also check your metering, you might need to change it from spot to center average or vise verse depending on what you're shooting.

[Myka]

Ok, I found the shutter speed. I adjust that with a button that has an asterisk on it. I would have never known...

Thanks for pointing out all these new adjustments! I'm still having some troubles focussing in macro. It beeps saying it has focussed, but when I look on puter it is not focussed.

My F number range (BKT?) is 2.8-8.0, and then I can spread the numbers (AEB?) from 2-4, but I can only choose one option, either AEB or BKT.

I think I need to take a photography course!

Right now on aperture priority it's bleaching the pics out... now I need to figure out how to change those settings so it isn't doing that anymore...