|
|
|
|
|
#1
06-17-2009, 11:03 PM
|
|||||
|
|||||
I used club soda on a few stubborn pieces of new rock. Had alot of holes for critters to hide in. Just used a turkey baster on holes you could inject, and on bigger areas I just poured it right out of the can or bottle. Found a lot of crabs that way - about 13 varying in size from 1/2 cm to 2 cm, and had very little if any greying on the rock (which would be die-off). I thought it worked great.
__________________
65 gallon mixed reef and 34 gallon mixed reef 
|
|
#2
06-17-2009, 11:05 PM
|
|||||
|
|||||
|
Quote:
Oh ok, I thought maybe you had to dip the whole rock in it. Good to know 
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
|
|
#4
06-18-2009, 12:23 AM
|
|||||
|
|||||
|
i would leave the stuff in there and put it spread out in a tank to cure, then remove unwanted critters as they shpw up.. if you have the time... the problem with dipping is you also remove the wanted critters and if you do it wrong can kill the bacteria in the rock. the best bet is to get dead drhy rock and resead it, but this takes time that most people don't want to waist.
Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
Hybrid Mode
