![]() |
#21
|
||||
|
||||
![]() Here is a conversion chart. I think most will agree you should be somewhere between 7 - 10 dKH.
http://www.saltwaterfish.com/vb/showthread.php?t=175205 |
#22
|
|||||
|
|||||
![]() Hmm, just a thought... how did you acclimate your crabs when you added them to the tank? Did you drip acclimate over the course of a couple hours? If you didn't slowly acclimate them, that is likely the cause of their death rather than some off parameter.
__________________
Calvin --- Planning a 29 gallon mixed reef... |
#23
|
||||
|
||||
![]() I really want porcelain crabs in my tank but they don't seem to survive.
I tried one from big als first, after the drip for 3 hours it died within about 2 hours of being in the tank then on my second attempt i bought 3 thinking it was maybe an unlucky crab and dripped for longer. One died in the drip chamber, the other two died after about 2 days. definitely something abotu my water conditions that is killing the crabs. I'm gonna invest in a slew of new test kits to get a better idea of what's going on with my tank. |
#24
|
|||||
|
|||||
![]() Salifert are a good quality test kit and a bit cheaper than Elos. I much prefer the Salifert alkalinity kit to the Elos one as well.
|
#25
|
||||
|
||||
![]() My alkalinity is
2 meq/L! that looks low according to everything I"ve read. Any ideas on how to fix this? |
#26
|
|||||
|
|||||
![]() By using this calculator: http://reef.diesyst.com/chemcalc/chemcalc.html
For a 30 gal tank dissolve 2 tsp of baking soda in water (I use RO/DI) to boost your alkalinity from 2 meq/lt to 3meq/lt Dont add the solution all at once to your aquarium, add a little at a time perhaps over a day and keep an eye on your pH if you can.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft Old 120gal Tank Journal New 225gal Tank Journal May 2010 TOTM The 10th Annual Prince George Reef Tank Tour |
#27
|
|||||
|
|||||
![]() Temp flux may start to cause havoc in smaller tank esp. Check in the morning and after the lights go out and see how wide the flux of temp is esp of a hotter day. Make sure you thermometer is accurate many are way off. You can pull it and cross check it with your home thermostat. Just another thing to check. Your salinity and how are you measuring it ?
|
#28
|
||||
|
||||
![]() Quote:
and salinity with a refractometer. |
#29
|
|||||
|
|||||
![]() Quote:
+1 on the salifert kits i like using them too easy to use. i have never had any problems with them ever since using them.... I also know that a sudden drop in ALk will cause you SPS to die too... that may have been your problem too, any sudden change in Temp by chance, or PH
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
#30
|
|||||
|
|||||
![]() Hi
Usually a change in alkalinity may cause that problem. What is your alk? Another direction is a change in salinity or in temperature. In my experience some folks damage their system during water changes without proper equalization. I have also noticed your ca is on the low side and you don’t have an ALK and MG test results. If you can provide dose it will help diagnosing you problem. When you touch you sps corals do they brake easily? |