big pump, little pump ?

iansfishy · #1 05-18-2009, 05:27 PM

I dont think the dart will push the twelve feet needed, and if it did it would be barely. I thought about a bigger pump like the hammerhead to do all the work ( CL and return) but that is at full open and trusting that some check valves on th CL will stop my tank from draining. I guess Ill go with two barracudas, just seems like alot of energy? But I guess if they are both valved down the energy consumption decreases as well. How come you can get more GPH out of a pump if you increase the pipe diameter? Does that still hold true if you say run 2 inch all the way then go down to 1 inch at the end? So after thinking about it for a minute does flow in the tank count as in the "tank" or total wter volume. For example- if the 180 has 120 g of water and i use a dart thats like 19 times turnover in the display thats pretty good. But if its total water volume like 250 g thats only like 13 or 14 times turnover/hour. but with a dart and having to go like six feet and 4 diffrent outlets according to the head loss calc from RC it cuts the GPH almost in half. I guess im looking for someone to justify my buying two barracudas! Thanks.

BlueAbyss · #2 05-18-2009, 06:42 PM

Okay, one more thing. With a closed loop, you don't need to worry about head pressure, since the outlets and inlets are at the same level the head pressure is negligible. Even if the pump is 12 feet below the tank, you should get similar flow to a pump that is right below the tank, though there will be some loss because of the length of pipe running to and from the pump.

Count your turnover through the display, not the entire system's capacity. Your corals won't care if you have 30x turnover through the sump, unless they're in the sump.

mark · #3 05-18-2009, 07:32 PM

Comment about the Barracuda, it's loud. I personally can handle the Dart directly below the display, but no way could I see having a Barracuda.

Could consider having a CL Barracuda in the basement as well, leaving the 4way directly below the display.

As for turnover, like this Canreef thread for a idea of what others have.

Oxymoron · #4 05-18-2009, 08:04 PM

Quote:

How come you can get more GPH out of a pump if you increase the pipe diameter? Does that still hold true if you say run 2 inch all the way then go down to 1 inch at the end?

Bringing your 2" line down to a 1" will reduce your entire flow to 1".

You would have to have the pipe and fittings 2" in order to not restrict your flow and essentially choke off your flow.

Myka · #5 05-18-2009, 10:14 PM

To avoid microbubbles you should aim for 3-6x turnover through the sump. I like 5-6x personally. Some people have 10x+, but you may experience troubles with microbubbles in the display then. If you choose a higher turnover through the sump you can add more baffles to it to help with microbubbles.

fishytime · #6 05-18-2009, 11:16 PM

Quote:

Originally Posted by mark

Comment about the Barracuda, it's loud. I personally can handle the Dart directly below the display, but no way could I see having a Barracuda.

Could consider having a CL Barracuda in the basement as well, leaving the 4way directly below the display.

We just started running a hammerhead gold at the shop and honestly is quieter than my queitone 6000. We are very impressed with it. A bit more expensive for the "gold" line but well worth it.

iansfishy · #7 05-19-2009, 02:14 AM

think Ill go with a barracuda return and CL. Ill just have both in the basement so no noise issues. Then Ill put the OM directly under the tank. That way I can feed the other tanks, and not ever have to upgrade pumps or worry about not haveing enough flow to run other things off of it. Anyone using the OM 4 ways not like them? Or wish they had done something diffrent?

aquatechy · #8 07-25-2009, 10:06 PM

Hate to break it to you, but you should buy two reeflo barracudas. Trust me... through my experience in this hobby, i can predict you will end up changing both anyways. TRUST ME, I've done this before, so im trying to save you the trouble.

One thing though. Where are you going to buy them? If you dont mind noise levels, I would contact reeflo directly and ask to be part of the field testing of their new pumps the "blackfin" line. They have more flow and pressure, and one of my friends has one and loves it.