![]() |
|
#1
|
||||
|
||||
![]() Kevin,
Cheyanne and I will be in Tuesday/Wednesday to pick up the mp-20 we requested..... and when you have time we're also ready to let loose our artistic inhibitions and lay out that piece of cardboard and dirty up your floors with a live rock creation. See you then. ![]() |
#2
|
|||||
|
|||||
![]() If folks wouldn't mind, can we please keep this thread to the group buy from Aquatic Addictions. If you are purchasing from other dealers that should be done by PM.
Thanks, Ron |
#3
|
|||||
|
|||||
![]() Quote:
Agreed. Or start your own thread. Thanks Dan, as we are only 2 province,s over, could we be in on the shipping included price. ![]()
__________________
Doug |
#4
|
|||||
|
|||||
![]() Quote:
![]() ![]() Dan |
#5
|
|||||
|
|||||
![]() I wanted to just clarify for everyone so there is no misunderstanding of the different models.
MP10: ![]() Operational Mode Feed Mode - Slows down your pump for 10 minutes to allow you to feed your aquarium. Constant Speed Mode - The pump runs at a constant speed you set based on your aquarium’s specific needs. Reef Crest Mode - Automatically simulates the high-energy conditions of a natural reef crest environment. Lagoon Mode - Automatically simulates a calmer, lagoon reef environment. Short Pulse Mode - Allows for wave pulse timings between 0.3 and two seconds, enabling the creation of FAST alternating flow throughout the tank. Long Pulse Mode - Allows for wave pulse timings of between two seconds and 60 seconds, enabling the creation of slow alternating flow throughout the tank. Night Mode - Enables the pump to operate for 14 hours in whichever mode is selected for the day and go back to Night Mode for 10 hours. Pump Disconnect - Automatically shuts down the system if the wet and dry sides become separated. Specifications Flow: 200 to 1575 gph Wattage: 8 to 18 watts Maximum Tank Thickness: 3/8″ Appropriate Tank Size Range: 2.5 to 50 gal Dimensions: Wet Side- 2.5″ diameter by 1.5″ long, Dry Side - 2.5″ diameter by 2″ long Clearance Needed Behind Aquarium: 2.25″ MP20: ![]() Operational Modes Feed Mode - Slows down your pump for 10 minutes to allow you to feed your aquarium. Constant Speed Mode - The pump runs at a constant speed you set based on your aquarium’s specific needs. Reef Crest Mode - Automatically simulates the high-energy conditions of a natural reef crest environment. Lagoon Mode - Automatically simulates a calmer, lagoon reef environment. Short Pulse Mode - Allows for wave pulse timings between 0.3 and two seconds, enabling the creation of FAST alternating flow throughout the tank. Long Pulse Mode - Allows for wave pulse timings of between two seconds and 60 seconds, enabling the creation of slow alternating flow throughout the tank. Night Mode - Enables the pump to operate for 14 hours in whichever mode is selected for the day and go back to Night Mode for 10 hours. Master pumps will tell their slaves to go into Night Mode as well. Pump Disconnect - Automatically shuts down the system if the wet and dry sides become separated. Flow: 500-2000 gallons per hour Power Consumption: 6-18 watts Maximum Motor Temperature: 30-40 degrees Celsius Aquarium Wall Thickness Range: 3/16”-3/4” Appropriate Tank Size Range: 30-70 gallons Dimensions: Wet Side- 3” diameter by 2.25” long; Dry Side- 3” diameter by 2.25” long Clearance Needed Behind Aquarium: 3” MP40: ![]() Operational Modes Feed Mode: Slows down your pump for 10 minutes to allow you to feed your aquarium. Constant Speed Mode: The pump runs at a constant speed you set based on your aquarium’s specific needs. Reef Crest Mode: Automatically simulates the high-energy conditions of a natural reef crest environment. Lagoon Mode: Automatically simulates a calmer, lagoon reef environment. Short Pulse Mode: Allows for wave pulse timings between 0.3 and two seconds, enabling the creation of FAST alternating flow throughout the tank. Long Pulse Mode: Allows for wave pulse timings of between two seconds and 60 seconds, enabling the creation of slow alternating flow throughout the tank. Night Mode: Enables the pump to operate for 14 hours in whichever mode is selected for the day and go back to Night Mode for 10 hours. Master pumps will tell their slaves to go into Night Mode as well. Pump Disconnect: Automatically shuts down the system if the wet and dry sides become separated. Wireless Wave Driver: Enables wireless coordination between multiple MP40w units right out of the box, with no extra equipment to buy - making it the most cost-effective solution on the market. Sync and Anti-Sync Slave Modes: In a multi-pump setup, slave pumps will operate in sync or inverse (anti-sync) to the master pump to create tidal currents within your aquarium. Flow The VorTech produces from 1,000 to 3,200 gallons per hour of low velocity gentle water current. The flow is so impressive and broad, that it actually creates an undertow along your sand bed. You will notice an equal amount of flow going out of your pump as you will see going back into it! Moreover, because the flow pattern is so wide, there is no reason to direction the flow, simply place the pump on the back or sides of your aquarium and flow will be created throughout the whole tank. Energy Savings The VorTech is one of the most efficient pumps on the market, and the new MP40W model is even more so, consuming only 28 watts to produce 3,200 gallons per hour. More importantly, all of the heat put out from the motor is outside of your aquarium, meaning you won’t have to invest in costly chillers to keep your tank cool. Battery Backup Accessory The VorTech Battery Backup will power one pump for up to 30 hours or two pumps for 15 hours each. Alternatively, multiple battery backups can be plugged into each other to provide even more run time during a power outage. There is no other product that detects an outage and provides as much insurance for so little money. Wave Motion Every MP40w model VorTech pump is wave controllable right out of the box! With our new Wireless Wave Driver, the VorTech pump can act autonomously to create waves in your aquarium, or can be synced with other pumps in the tank to create random and pulsing movements. When any one pump is entered into feed mode, the pump will signal all other VorTech pumps to shut down, eliminating the time required for you to turn off each pump individually. No other pump on the market can even compare to the intelligence of the VorTech pump. Specifications Flow: 1,000-3,200 gallons per hour Power Consumption: 9-28 watts Maximum Motor Temperature: 50-60 degrees Celsius Aquarium Wall Thickness Range: 3/16”-3/4” Appropriate Tank Size Range: 50-500+ gallons Dimensions: Wet Side- 3” diameter by 2.25” long, Dry Side- 3” diameter by 2.25” long Clearance Needed Behind Aquarium: 3” ![]() Hope this helps for everyone to decide and those that havent decided to choose whats best for them. ![]() Dan |
#6
|
|||||
|
|||||
![]() Quote:
Well, ![]() Thank-you Dan, {and Ron}.
__________________
Doug |
#7
|
|||||
|
|||||
![]() A big thank you to Dan for offering us all a great deal. And he stepped it up a notch again by offering free shipping to anywhere in Canada. So get your orders in for a great deal! 10% off and free shipping is better than the deals many US dealers were offering.
|
#8
|
|||||
|
|||||
![]() Quote:
MP40 x 5 MP20 X 3 And if I can squeak it a MP10 for GSP? (maybe a "test" unit ![]() Dan |