![]() |
|
#1
|
||||
|
||||
![]() Actually Dan and Nicky suggested the O2 could be depleted. She purchased a test kit, went home,tested the water.....VOILA !!!!
O2 = 0.00 Opened the lid ( tank has glass lids) Added a couple of airstones and powerhead Moved the Korallias towards the surface Within 1 hours O2 started to climb. The corals are looking better but PH is still low 7.6 but is expected to climb up. Husband currently in her carport building sump, not allowed in the house until done ![]() She also purchased a CPR overflow since tank is not drilled.
__________________
Andy |
#2
|
|||||
|
|||||
![]() I (and I'm sure others as well ) didn't know that there are glass lids on this tank, The lids as well as no surface skimming due to the canister filter is why there is no oxygen exchange at the water surface..... THE Glass lids have to go !
The PH will rise as the O2 levels go up and the CO2 levels go down ( CO2 drives PH down, same principle as a calcium reactor)
__________________
HAPPY REEF KEEPING !!______________________ Last edited by Tangman; 03-18-2009 at 02:00 AM. |
#3
|
|||||
|
|||||
![]() Yah, i have really learned alot in the past two days. I no longer have lids and and my sump is being built as we speak. I am really grateful to everyone that tried to help, especially Belezuth, who spent hours helping me change water and do repeat testing. And another thank you to AA who spent alot of time troubleshooting and determining to cause. Thank you all again. Right now my tanks are being aerated and closely monitored, they have white board marker test results all over them.
![]() |
#4
|
|||||
|
|||||
![]() You can put your lids back on once you get a skimmer. I have had lids on some of my tanks (with skimmers) with no troubles. Help keep evaporation down as you already know. Now that you have an O2 kit, you can always test just to make sure!
![]() Expensive lesson to learn, but you can scratch that one off the list on newbie mistakes now. ![]() |
#5
|
|||||
|
|||||
![]() an absolute tragedy, but I learned a ton just by tagging along. I am truly sorry for your losses but thanks for sharing it with us.
|
#6
|
|||||
|
|||||
![]() I also am very sorry for the losses you have ocurred but I want to thank you for sharing it with us so that we all can learn a little more about this hobby.
__________________
![]() 10 Gal Nano Contest: http://www.canreef.com/vbulletin/sho...d=1#post348308 90 Gal Corner Pentagon Build: http://www.canreef.com/vbulletin/showthread.php?t=42263 |
#7
|
|||||
|
|||||
![]() Really sorry for your losses. Much more gained by the rest of us tagging along on this thread. I have learned a great deal from this incident.
Good luck with getting back up....I hope the rest of your tanks inhabitants make it. Brad |
#8
|
|||||
|
|||||
![]() Quote:
![]() Wow...ya if I'm the jury, the jury is in, and the guilty part is oxygen starvation for sure! The glass lids wouldn't be a problem if you ran a skimmer, but from what I understand you don't have a skimmer, right? Then the powerheads not giving any surface agitation...poor combination. pH is low because of elevated levels of CO2 in the water due to not being able to off-gas, and not enough O2 being injected into the tank. Simply adding an airstone will often increase pH. For more information on this subject read the pH heading in my guide on reef chemistry in my signature. |
#9
|
|||||
|
|||||
![]() You were absolutely correct in you trouble shooting. Thank you !!!!!!!! Your help is much appreciated. I am only using bubble wands for now until the O2 level corrects its self. It does seem to help. Any other thoughts are appreciated!!!!!
|
#10
|
|||||
|
|||||
![]() Quote:
LOL - I guess that comes from 28 years in the fire service and dealing with toxic atmospheres. Makes me think on different lines. Hopefully things are improving.
__________________
250 gal display tank plumbed directly to my wallet |