tempered or not ?

[Parker]

If you have the right light and you wear polarized sunglasses you can also see a diamond shape cross hatch pattern to the glass if it's tempered,

[golf nut]

I also believe that if it is tempered the diamond bit will simply slip, and not cut at all.

[sphelps]

Originally Posted by Mr OM

I also believe that if it is tempered the diamond bit will simply slip, and not cut at all.

False, it will cut and shatter the glass. You can use polarized lenses but as far as I know you need two, one of each side of the glass. If you look through both filters you should see a spider web pattern if it's tempered and nothing if it's not.

Chances are it's not tempered glass, custom tanks are not usually tempered as it is almost always cheaper to use thicker glass over tempering. If you can supply the dimensions and glass thickness I can give an educated guess if it's tempered or not.

[jaydsl]

Originally Posted by sphelps

False, it will cut and shatter the glass. You can use polarized lenses but as far as I know you need two, one of each side of the glass. If you look through both filters you should see a spider web pattern if it's tempered and nothing if it's not.

Chances are it's not tempered glass, custom tanks are not usually tempered as it is almost always cheaper to use thicker glass over tempering. If you can supply the dimensions and glass thickness I can give an educated guess if it's tempered or not.

ok pannel sizes are ,base is 48 x 22 in front/back 32.5 x 48 in sides 20.75 x 32.5 in and thickness is 9/16 - 14 or 15 m i think if this helps , i will try the polar glasses , i have some of those , i fish

[sphelps]

The glass thickness (15mm) would suggest the tank is not tempered, however since I didn't build the tank that's all I can say.

Best double check, perhaps you could contact the manufacturer?