|
|
|
#11
02-22-2009, 05:29 PM
|
||||
|
||||
my lights were 10" off the top of the water 3 250 SE MH and i had 4 5" fans running and center light to come on 1 hrs before the 2 outside lights and run for 5 hrs as a set then outside 2 shut down and center light for 30 more mins and then shut down to activate led moon lights for the night and my temp range when from 78.4 to 80.1 through out a 24 hrs period.
Cheers JC 
|
|
#12
02-22-2009, 05:48 PM
|
|||||
|
|||||
|
Here's the picture of the fans I am using. I have one pointed underneath each of the MH's.
 Here's the plug in they are wired to:  When buying the plug in you have to make sure it can handle the number of fans you are using. Each fan was .17A (or 170 mA) and the plug in is 450 mA. The total of the fans must not exceed the output of the plug in. An ordinary lamp cord was wired to the plug in, then each of the fans were wired to the cord. I'm sorry I don't have any pictures of this process. Anyone familiar with house or auto wiring will be able to help you with it.
__________________
 10 Gal Nano Contest: http://www.canreef.com/vbulletin/sho...d=1#post348308 90 Gal Corner Pentagon Build: http://www.canreef.com/vbulletin/showthread.php?t=42263
|
|
#13
02-22-2009, 06:01 PM
|
|||||
|
|||||
|
Quote:
My brother found me a few great car fans made for interior use (so really quiet) that look very nice and are incredibly strong. I think I will try a few of them.
|
|
#14
02-24-2009, 07:04 AM
|
|||||
|
|||||
|
Check this out;
http://www.ncix.com/products/?sku=17129 NCIX has a great PC fan selection. Figured I'd share this link, as it's a 3-speed fan so you can try different speeds and check results as not to cause over evaporation. Use a similar transformer just like rocketlily posted pic of 
__________________
28g Nano Cube drilled with 13g sump in stock stand. Vertex IN80 Skimmer, Phosban 150 Reactor, Apex Controller, DIY LED with stock hood, dimmable Established March 2006
|
|
#15
03-02-2009, 09:30 PM
|
|||||
|
|||||
|
Fans
I picked up mine from Memory Express they were $19 ea. Although they only move 30 CFM a piece I sure like the noise level, 8db.
|
Linear Mode
