Simple method of dosing alk?

[untamed]

Holmes-Farley would say that if you are able to measure decline in Alk...then you need to be added more of BOTH Ca and Alk...not just Alk. It is beyond me to explain why it works that way.

[fkshiu]

Originally Posted by untamed

Holmes-Farley would say that if you are able to measure decline in Alk...then you need to be added more of BOTH Ca and Alk...not just Alk. It is beyond me to explain why it works that way.

Bingo! Ca/Alk/Mg are all interlinked. You can't change one without affecting the other two.

[ponokareefer]

Originally Posted by fkshiu

Bingo! Ca/Alk/Mg are all interlinked. You can't change one without affecting the other two.

I totally get that. For part of 2008, I was getting my magnesium level up, and until it was up, I couldn't get my alk & calcium high enough. After my magnesium level was at 1400, my calcium and alk levels were good. After I bought my largest clam, my magnesium levels stayed the same, calcium levels went in the high 400's, and alk dropped below acceptable levels. By adding alk, my alk comes back into an acceptable level, my calcium dropps into the low 400's, and my magnesium stays the same. Should I be adding calcium as well, even though what I am doing is keeping all levels in the acceptable levels?

[midgetwaiter]

Originally Posted by ponokareefer

I totally get that. For part of 2008, I was getting my magnesium level up, and until it was up, I couldn't get my alk & calcium high enough. After my magnesium level was at 1400, my calcium and alk levels were good. After I bought my largest clam, my magnesium levels stayed the same, calcium levels went in the high 400's, and alk dropped below acceptable levels. By adding alk, my alk comes back into an acceptable level, my calcium dropps into the low 400's, and my magnesium stays the same. Should I be adding calcium as well, even though what I am doing is keeping all levels in the acceptable levels?

You use tap water rather than RO right? I imagine Ponoka has fairly hard water like the rest of the province so every time you do a top up with your tap water you are adding a fair amount of calcium but not very much alkalinity. If you use something like Kalkwasser in your top up it won't fix the problem as you are adding more or less balanced amounts of calcium and alkalinity to water that already has a lot of calcium. Boosting only alk in the top up by adding something like sodium carbonate (your baked baking soda) makes you top up into a balanced calcium / alk additive as well.

The easy way to go forward is to get yourself an auto top off of some kind and supplement the ATO water with Alk.

[ponokareefer]

Originally Posted by midgetwaiter

You use tap water rather than RO right? I imagine Ponoka has fairly hard water like the rest of the province so every time you do a top up with your tap water you are adding a fair amount of calcium but not very much alkalinity. If you use something like Kalkwasser in your top up it won't fix the problem as you are adding more or less balanced amounts of calcium and alkalinity to water that already has a lot of calcium. Boosting only alk in the top up by adding something like sodium carbonate (your baked baking soda) makes you top up into a balanced calcium / alk additive as well.

The easy way to go forward is to get yourself an auto top off of some kind and supplement the ATO water with Alk.

Any recommendations on a good ATO? I see Tunze carries one, but it appears to come with a tank to hold water, and I'm going to have to make a custom one, as I don't have a lot of space to put it.

[Myka]

If you want to automate your tank more, I would also suggest you get an ATO and add your Alk to the reservoir. You will need to have a reservoir for the ATO. The size depends on what you want, but I would suggest something at least 15% of your total system's volume or you will end up having to fill the reservoir too often.

I can't imagine what you have under your tank that is taking up all the space when you only have a 55g sump and no reactors?? Is it poor space management? Maybe you can try to do a renovation under there, and get some more space opened up?

Is it true that you are using tap water? If so, that may be your answer as to why you're needing to add alk, but not calcium as midgetwaiter suggested. If you are in fact using RO/DI water then you need to look into the alk usage futher.

[ponokareefer]

Originally Posted by Myka

If you want to automate your tank more, I would also suggest you get an ATO and add your Alk to the reservoir. You will need to have a reservoir for the ATO. The size depends on what you want, but I would suggest something at least 15% of your total system's volume or you will end up having to fill the reservoir too often.

I can't imagine what you have under your tank that is taking up all the space when you only have a 55g sump and no reactors?? Is it poor space management? Maybe you can try to do a renovation under there, and get some more space opened up?

Is it true that you are using tap water? If so, that may be your answer as to why you're needing to add alk, but not calcium as midgetwaiter suggested. If you are in fact using RO/DI water then you need to look into the alk usage futher.

I use RO water, not tap water, so I don't think that is the problem. When I was using tap water over 2 years ago, I was having issues with phosphates, so switched.
A main issue with space is I have to set up a fan underneath in the summer to keep the temperature down, so that chews up a lot of the space. I suppose I could put the fan on top of the reservoir, rather than a stand, opening that up, and also screwing in my MH ballast's to the wall.