![]() |
|
#1
|
|||||
|
|||||
![]() FOWLR, I just had NO florescent with T12 marine bulbs, lots of light.
Depends on fish load but can't go wrong with a good/great skimmer. |
#2
|
||||
|
||||
![]() Like mentioned already, if it is just fowlr then you can use pretty much any lighting system you want. If you want the ability to get into all types of corals then go with a decent t5 unit. Pay the money for a good skimmer now, because you will probably have a high bioload and a basic skimmer will not cut it, which will cause you a tonne of problems later on.
You will not need a Zeovit system for a fowlr, but you can make a little extra room in you sump for future add ons. When I was running a fowlr all I had in my sump was my skimmer, return pump and a heater. I later added in a UV sterilizer, but you don't have to add one if you don't want to.
__________________
RSM 250. Clownfish, Fox face, Blue tang, Yellow tang, Kole tang, Clown tang, Coral beauty angel, French Angel, splendid dottyback. CUC, softies, lps, sps. |
#3
|
||||
|
||||
![]() If cost is important I would look at an Octo Extreme or Bubble Magus skimmer (people seem happy with both as long as you get one with a decent pump).
For lighting, I agree that T5HO's would be a good pic as they are not badly priced and use a lot less electricity. The other reason I would go with them rather than anything else is that they are versitile in case you decide to make it a reef tank. NO T5's and PC's limit you pretty badly. What length is the tank? That will also affect your thoughts on lighting as the longer the tank gets, the tougher bulbs become to find.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#4
|
||||
|
||||
![]() Well i'm looking at a 5'*2'*2' tank. for lights I've selected the tek 6*54 watts t5 and for a skimmer I'm looking at Tunze 9210 or an Aqua C EV-180.
I'm liking the idea of having a larger sump and if I convert to a reef tank in the future I can add the zeovit later. Even though a single phosban system is rated for 150g do you think it could be good for controlling phosphates. I'm leaning away from a sand bottom as my reef tank right now has one and for the most part is a nitrate depository. A glass bottom with coraline is good enough for me. Thanks for the info. |
#5
|
||||
|
||||
![]() I would be hesitant with the Tunze skimmer. They are good skimmers but support for them in Canada is atrocious. I have a 9015 and some things have gone wrong and taken months to get support if any at all. They have great support in the US but he can't help you in Canada.
If it's about power consumption I think the Aqua C might take a lot more power than your typical Octo extreme for example. Plus the Mag's on the Aqua C are darn noisy. Not sure if that will matter for you though.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#6
|
||||
|
||||
![]() not sure about power consumption but the in sump skimmers i have experiance with that i liked are ...
Euro-Reef rs 135- awsome as is out of box, works excellent, though obviously for a system that size you want a larger model. ASM G6- awsome once slightly moded, and more than big enough, rated up to 1200 gallons, running on 180 gal water volume system. i also have a zeo-vit reactor, and it has been excellent at keeping my nitrates barely registerable (if at all, less than 1ppm), even with minimal water changes (dose all the suppliments regularly since were not replenishing with new salt to often). also running T5HO's, love them, using the zeo-vit company bulbs and they produce a lovely color when used in the right combination, as well as much easier on the electricity bill than other lighting options. (previously had MH and PC) Last edited by Megs; 03-20-2009 at 05:39 PM. |