Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 01-24-2009, 03:38 AM
tgoeujon's Avatar
tgoeujon tgoeujon is offline
Member
 
Join Date: Jan 2008
Location: Clinton, B.C.
Posts: 465
tgoeujon is on a distinguished road
Default

hmmmmm, maybe just buying a ready made calcium reactor would be the way to go.
__________________
110 gallon mixed reef with 77 gallon sump/frag tank
Reply With Quote
  #2  
Old 01-24-2009, 01:31 PM
banditpowdercoat's Avatar
banditpowdercoat banditpowdercoat is offline
Member
 
Join Date: Oct 2007
Location: 100 mile hse BC
Posts: 2,568
banditpowdercoat is on a distinguished road
Default

I've been wondering the same thing. I'ts almost time for me to look at a Ca reactor. I have a Phos Reactor, but my Ca is allways to low.

Do you need Co2 with a Ca Reactor? Would like to not have Co2, as I dont have room to add it. Maybe Kalkwasser?????
__________________
Dan Pesonen


Umm, a tank or 5
Reply With Quote
  #3  
Old 01-24-2009, 04:26 PM
fkshiu's Avatar
fkshiu fkshiu is offline
Member
 
Join Date: Sep 2005
Location: Vancouver, BC
Posts: 1,499
fkshiu is on a distinguished road
Default

A calcium reactor works by using co2 to lower the pH in the reactor which dissolves the media (dead coral skeletons pretty much) thereby releasing the Ca, Mg, Alk etc into your system. As others have stated, simply leaving the media in a reactor without co2 wouldn't do very much for a reef system since nothing is being dissolved into the water.

Using a kalk reactor can only take you so far. Kalk is limited because it gets saturated at a certain point and you can only add as much as your evaporation rate. Vinegar does increase its potency but it still cannot keep up with a high demand system.

Your other option is to begin dosing a two-part system with either stock chemicals (cheaper) or name brand chemicals (more expensive) - CaCl, NaCO, MgSO4/MgCl.
Reply With Quote
  #4  
Old 01-24-2009, 05:59 PM
whatcaneyedo's Avatar
whatcaneyedo whatcaneyedo is offline
Member
 
Join Date: Apr 2007
Location: Prince George, BC
Posts: 2,198
whatcaneyedo is on a distinguished road
Send a message via MSN to whatcaneyedo
Default

Quote:
Originally Posted by fkshiu View Post
A calcium reactor works by using co2 to lower the pH in the reactor which dissolves the media (dead coral skeletons pretty much) thereby releasing the Ca, Mg, Alk etc into your system. As others have stated, simply leaving the media in a reactor without co2 wouldn't do very much for a reef system since nothing is being dissolved into the water.

Using a kalk reactor can only take you so far. Kalk is limited because it gets saturated at a certain point and you can only add as much as your evaporation rate. Vinegar does increase its potency but it still cannot keep up with a high demand system.

Your other option is to begin dosing a two-part system with either stock chemicals (cheaper) or name brand chemicals (more expensive) - CaCl, NaCO, MgSO4/MgCl.
Heres an article on choosing supplementing schemes to further detail what fkshiu is saying http://www.advancedaquarist.com/issues/feb2003/chem.htm
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft

Old 120gal Tank Journal
New 225gal Tank Journal
May 2010 TOTM
The 10th Annual Prince George Reef Tank Tour
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 10:35 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.