looking for output mod for deltec mce 600

[curtisharrison]

looking for output mod for deltec mce 600...thanks

[Pescador]

It kinda looks like it's just a 90 and a 130 elbow with a piece of 1 1/2" pvc. Maybe Home Depot?

[curtisharrison]

its a little smaller then.. 1 5/8 0r 40 mm

[RuGlu6]

I tryed that,(both soft nad hard material) like vacuum hose) you will get air bubbles back to the tank.

It is not an issue of corse if skimmer is in the sump..

[tony1928]

I tried that myself as well....getting alot of bubbles back into the tank. There must be some trick as Deltec sells something that looks more or less like the same thing. I assume there's something we're doing differently than them? http://www.deltecusa.us/proteinskimmers/mce600.php

It doesn't look like anything special.....

Any insights would be much appreciated. Thx.
Tony

[RuGlu6]

Just let it run in for a while (a month or so) it took surprisingly long time for mine to stop producing micro bubbles.
But some times when i use AlgeaX it will produce bubbles again.
All i use is the supplied plate and it works fine.