Ghl Profilux Discussion And Support Thread

[Aqua-Digital]

Hi

I am not sure what you mean by "jump outputs" but you can not run Tunze and LED on the same port pair.

It is also advisable to keep dimmable lighting on a seperate port as depending on how you have wired it the ballast can use both ports.

[Todd]

Originally Posted by Aqua-Digital

Hi

I am not sure what you mean by "jump outputs" but you can not run Tunze and LED on the same port pair.

It is also advisable to keep dimmable lighting on a seperate port as depending on how you have wired it the ballast can use both ports.

So even though I only have three devices I can only run two devices on four ports?

By jumping I mean this: The dimmable ballast runs correctly when it is on L1/L2 by itselft, but when I split the port using a splitter and put a tunze on the other port, the ballast changes outputs with the tunze, but still switches on and off correctly.

[Aqua-Digital]

Dimmable ballasts will use two ports as they are dual mode and can be dimmed independantly, however you can wire them together.

LED sticks and spots use two ports as they are dual channel.

Tunze use one port each.

Do not mix and match tunze with dimmable always have running on sperate ports i.e dimmable on L1L2 and Tunze on L3L4

if you are out of ports you can use the PLM-4L card.

[Todd]

Originally Posted by Aqua-Digital

Dimmable ballasts will use two ports as they are dual mode and can be dimmed independantly, however you can wire them together.

LED sticks and spots use two ports as they are dual channel.

Tunze use one port each.

Do not mix and match tunze with dimmable always have running on sperate ports i.e dimmable on L1L2 and Tunze on L3L4

if you are out of ports you can use the PLM-4L card.

Thanks for your help quick replys as always! I was having alot of problems getting trying to get it to work. I am disapointed that I cant do this with my current configuration, I'll look into the expansion card.

[bullit67]

Ok i know this has been asked befor but I moved my sump down to the basement I now need to move the the controller down stairs BUT I need to have power bars upstairs for my lights can I use a standard rj11 phone cable to make the longer run if so how long of a run can I make if not how long of a cable can I get for the porfilux.

Thanks
Doug

[Aqua-Digital]

VSL-5 cable can be dasiy chained to 50'

[Gordon H]

I have a Profilux II Plus controller and I want to mount it on a wall. At one time I understood that Profilux was going to make one -then they decided against it. If anyone else has mounted it on a wall, can they tell me how they did it?

Thanks in advance,
Gord.