68G cube becomes a 95G Reef :)

[lastlight]

Yeah I was referring to your lack of a second hole sorry should have mentioned that. 14 foot ceilings does make it tough. can you mount the canopy to the wall so it cantilevers out over the tank? I was going to do this but the wife vetoed and made me go the fixture route...

[GreenSpottedPuffer]

Originally Posted by lastlight

Yeah I was referring to your lack of a second hole sorry should have mentioned that. 14 foot ceilings does make it tough. can you mount the canopy to the wall so it cantilevers out over the tank? I was going to do this but the wife vetoed and made me go the fixture route...

Oh ok...I misunderstood.

No I don't want to drill onto the walls. They too are solid concrete and then finished with a thin coat of a nice concrete that crumbles really badly when you drill them.

In the first pic you can see a plam tree. That thing is 10' tall. So gives you an idea of the height.

I will get pics of what I have done with the light tomorrow. I think its ok but am looking for new ideas.

[GreenSpottedPuffer]

Is this similar to how some people are using a T near the end of their drain line to get air out and hopefully keep everything a bit quieter?

Advice?

Red is where air would be escaping the drain.

[GreenSpottedPuffer]

So if that would work ^^

Would this work just the same? Anyone know if this is how "T"'s are used to keep things quiet going into the sump?

I really can't remember but I know its something kind of like this. Or is it pointless to have both the "T" at the top of the drain and near the bottom?



I wouldn't mind getting this glued tonight if someone knows...

[Delphinus]

I've never tried it but I think if nothing else, that the worst case scenario you have to account for is that the lower T may need a pipe that goes all the way back up to the top to ensure water will never come splashing out of it. I suppose even if it did it would just empty into your sump so maybe it's not a big deal.

Sorry, I probably shouldn't reply to a thread when my answer really can be boiled down to "DUH, I actually don't know, DUH" but I thought I'd throw my two bits in.

Tank build looks great. Can't wait to see the results of your drain idea.. Why not just try it dry fit for now (yeah, the joins will leak a tiny bit but it would be enough to tell you if your idea is workable or not.. ??)

[GreenSpottedPuffer]

Originally Posted by Delphinus

I've never tried it but I think if nothing else, that the worst case scenario you have to account for is that the lower T may need a pipe that goes all the way back up to the top to ensure water will never come splashing out of it. I suppose even if it did it would just empty into your sump so maybe it's not a big deal.

Sorry, I probably shouldn't reply to a thread when my answer really can be boiled down to "DUH, I actually don't know, DUH" but I thought I'd throw my two bits in.

Tank build looks great. Can't wait to see the results of your drain idea.. Why not just try it dry fit for now (yeah, the joins will leak a tiny bit but it would be enough to tell you if your idea is workable or not.. ??)

Yeah I am going to dry fit first but I was hoping to just kind of find someone who had done this. I remember seeing someone on RC had done this to keep the water emptying into the sump quieter. I just don't remember how it worked exactly.

I think I will just try everything without the T first and then see if I even need it.

[GreenSpottedPuffer]

This is the rubbermaid sump I am using. You can see, not much space to work with but at least I was able to get a 30G sump out of it. On the shelf to the left is a bucket that will be the Auto Top off (kalk). I would have preferred to keep using the garbage can I have been using for auto top off but there was no where to put it this time. Oh well...better than nothing I guess.

Not much else yet. You can see the drain plumbing on the right is not done. I have no idea at his point what I want to do with that.



And this is the overflow in the tank. You don't see it at all when viewing unless you are looking for it.

[Pan]

Originally Posted by GreenSpottedPuffer

Is this similar to how some people are using a T near the end of their drain line to get air out and hopefully keep everything a bit quieter?

Advice?

Red is where air would be escaping the drain.

I wouldn't use the crooked pvc pictured in the drawing....

[GreenSpottedPuffer]

Originally Posted by 'Ol Nobodaddy

I wouldn't use the crooked pvc pictured in the drawing....

Yeah I tossed that idea out right away