![]() |
|
#1
|
|||||
|
|||||
![]() Looks good. I look forward to seeing it grow!
__________________
Robb |
#2
|
|||||
|
|||||
![]() Very good start! Be aware SPS, Clams, and Anemones won't survive under PC lighting. Though, I did notice you say "Will double check on that one once I get the upgraded lighting done. ", You may want to wait up to a year with a nano before trying any of the above.
__________________
28g Nano Cube drilled with 13g sump in stock stand. Vertex IN80 Skimmer, Phosban 150 Reactor, Apex Controller, DIY LED with stock hood, dimmable Established March 2006 |
#3
|
|||||
|
|||||
![]() Yeah I would not put any SPS (except easy montipora... definitely no acropora), clam or anemone in there. I also get nervous about anemones in small tanks because if they don't like where they are, they'll get up, move and sting everything in their way. Also, you need to very carefully consider whether or not you are willing to feed that sun coral almost every day; I know too many cases where people have bought them and just got fed up with the high maintenance they require.
Your ammonia has to be zero. Also, salinity of 1.225?! I assume you meant 1.025? Are you measuring that with a refractometer? |
#4
|
|||||
|
|||||
![]() I agree with the above two, and also be aware that the SPS will be brown without super intense lighting.
|
#5
|
|||||
|
|||||
![]() I have been keeping an unknown Acro and a RBT anemone quite happy for a year now in my 14g biocube with std pc lighting. Although for Christmas they are getting a 90 gallon upgrade.
![]() |
#6
|
||||
|
||||
![]() I am aware of the issues with the Acro and the lighting, this is why I will be placing them near the top of the tank, I am also looking at deep water species that do not require the same lighting perametes as most othe Acros.
The lighting upgrade I have will be the 130 watt power compact flourescent which comes with 12,000k bulbs and dual atcinic. Yes, sorry I meant 1.0225 and I have been going back and forth with using a hydrometer and a refractometer to ensure it is the same. The Corals I am getting are coming from a fellow hobbiest and he has been growing these under Pc Lighting and others under Halide mix t5 lighting. The clams and BTA I am getting from him will be coming from a PC lighting system and they have beautiful colours on them. Also, BTA require less lighting than other anemone. They can deal with 5.5+ watts per gallon, but you do also have to ensure they are fed properly. Takes a little more work but I kind of like that. The tank I have was used for 6 months previously by my seller as a display tank until he upgraded his garage to house more tanks, and when I purchased stuff from him, I ensure it was all cured and seeded the system with some of his cured crushed coral and water. But I am taking things slow and he suggeted I should be able to add the BTA and 2 clownfish in February, but also suggested that I keep a eye on parameters and doing it on different weeks so I don't get a huge spike. Update: Discovered the following in my tank last night after lights out when I was looking through it with a flashlight. 1 Chiton, and 2 Itsy bitsy little starfish about the size of an eraser on the end of a pencil. |
#7
|
|||||
|
|||||
![]() I used to have a similar light and trust me, if you plan on keeping SPS (even in a high location) you are going to run into issues
ignore the whole watts per a gallon thing. It really comes down to the PAR that the light is producing. Say you have a 130 watt power compact and a 130 watt T5HO fixture with individual reflectors. the T5HO fixture will have a higher output due to the design of the fixture and the bulbs give off more PAR. Plus compared to LPS or soft corals it is hard to keep your parameters contants in a tank that size. I am not trying to blow you off away from SPS but like mentioned before a monti or birdsnest is a better choice. acro's need proper chem balance and proper lighting, they are beautiful but you need to limit yourself to what you can keep with your equipment. |