![]() |
#1
|
||||
|
||||
![]() Just wondering if you have any troubles with your siphon break clogging with your herbie overflows? Mine tends to get clogged up fairly quickly making me a little nervous...just wondering if there is a better alternative than unblocking/cleaning all the time.
Cheers
__________________
60 Gallon rimless, internal Herbie overflow, ATI Powermodule, Eheim 1250, 2X Tunze 6055, Tunze ATO, Euroreef RS100, Profilux controller, TLF Reactor. |
#2
|
|||||
|
|||||
![]() Jasond
if you make sure you have secondary/emergency standpipe, i never had any problems with it. I do have to occasionaly open it up a 360 and then closing it again. it helps to write in numbers on the gate valve like a face of a clock so I know how much to unturn and turn back.
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up. |
#3
|
|||||
|
|||||
![]() any good info on the herbie set up? I am thinking of doing this one the new system.
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#4
|
|||||
|
|||||
![]() Can't understand why a Herbie would effect a siphon break. For siphon break you are meaning a small hole in the return line from the pump back to the display?
|
#5
|
|||||
|
|||||
![]() Quote:
I don't really understand what you mean by a "siphon break" clogging. There is no siphon on a herbie - it's purely gravity driven. Do you mean the gate valve on your primary drain is clogging? If not, where exactly is the clog occurring? Chin is right: make sure you have a second emergency drain ready. |
#6
|
||||
|
||||
![]() Quote:
Stircrazy...lots of good info on here about the Herbie overflow, as well as reefcentral. Albert used to be the guy to speak with, not sure if he is still around or not...
__________________
60 Gallon rimless, internal Herbie overflow, ATI Powermodule, Eheim 1250, 2X Tunze 6055, Tunze ATO, Euroreef RS100, Profilux controller, TLF Reactor. |
#7
|
||||
|
||||
![]() Yes, thanks Mark, that is exactly what I mean. I have a small hole/line running from the return into the emergency overflow, this is what is getting clogged.
__________________
60 Gallon rimless, internal Herbie overflow, ATI Powermodule, Eheim 1250, 2X Tunze 6055, Tunze ATO, Euroreef RS100, Profilux controller, TLF Reactor. |
#8
|
|||||
|
|||||
![]() Quote:
I don't understand why the emergency overflow drain seems to be involved with the return line. Maybe a photo?
__________________
400 gal reef. Established April, 2007. 3 Sequence Dart, RM12-4 skimmer, 2 x OM4Ways, Yellow Tang, Maroon Clown (pair), Blonde Naso Tang, Vlamingi Tang, Foxface Rabbit, Unicorn Tang, 2 Pakistani Butterflies and a few coral gobies My Tank: http://www.canreef.com/vbulletin/showthread.php?t=28436 |
#9
|
||||
|
||||
![]() It is not involved, that is just where I have stuck the line. Agreed a photo will help, I will try to get one up tomorrow.
__________________
60 Gallon rimless, internal Herbie overflow, ATI Powermodule, Eheim 1250, 2X Tunze 6055, Tunze ATO, Euroreef RS100, Profilux controller, TLF Reactor. |
#10
|
|||||
|
|||||
![]() You can't have the return higher in the tank so once the water level lowers the siphon will naturally break??
|