Contest #1 Nano - New Rock Work

[Ryan_Lap]

Originally Posted by superduperwesman

and I still need to find something to put under the one side of the stand to level things off... I was going to use the pink foam but its $20 a piece

Use cardboard...its free. You shouldnt be able to see it either.

[sphelps]

I think you should get 4 screw-in stump legs, similar to what you would find under a common couch and similar to left leg shown below. But a lower profile so you won't see them.



This could also allow for adjustment, a couple washers should do the trick. It might be easier using foam or cardboard but I don't it will work as well, using legs will also make it more stable.

[superduperwesman]

Yeah I'll have to find something??? Like a box that I can flatten and use... or some kind of small leg??

[superduperwesman]

Maybe something like this

[sphelps]

Originally Posted by superduperwesman

Maybe something like this

Yeap, but you can get ones exactly the same except they screw in and have leveling adjustment, HD sells them.

[superduperwesman]

Originally Posted by sphelps

Yeap, but you can get ones exactly the same except they screw in and have leveling adjustment, HD sells them.

Yeah but the problem now is that I need something simple if I'm gonna be able to do it with the full tank and sump on there

[superduperwesman]

Here is the light I got for my fuge... but I ripped it apart and made it smaller



Basically just using the head and the base... $10.00

[sphelps]

Originally Posted by superduperwesman

Yeah but the problem now is that I need something simple if I'm gonna be able to do it with the full tank and sump on there

Just drain the tank and sump, don't be stupid and try and install legs with it full. It'll only take an hour tops.

[Ryan_Lap]

If you have a stud in the wall right behind the very right of the stand you could possibly use a couple "L" brackets to support it where you need. You also wouldnt be able to see them since the stand sits so low.

[superduperwesman]

Originally Posted by Ryan_Lap

If you have a stud in the wall right behind the very right of the stand you could possibly use a couple "L" brackets to support it where you need. You also wouldnt be able to see them since the stand sits so low.

Yeah the stand is just a bit off level... just enough to bug me, so I'll prob just put something small under the one side