![]() |
|
#1
|
|||||
|
|||||
![]() I'm topping off manually to keep things simple, I might have to rig something up later down the road when I'm gone for over a week. I did make a lid but it's not all glass, it's a glass frame with mesh in the center. This way it cuts back a little on evaporation, keeps livestock from escaping and still allows heat exchange so the tank doesn't over heat from the lights.
|
#2
|
|||||
|
|||||
![]() So how much you topping off per day??
|
#3
|
|||||
|
|||||
![]() about 2 cups a day, but I usually just put in a liter or two a week.
|
#4
|
|||||
|
|||||
![]() So tonight I'll be trying to get the fuge light mounted to the lid of the right compartment.
and adding egg crate... and I still need to find something to put under the one side of the stand to level things off... I was going to use the pink foam but its $20 a piece |
#5
|
|||||
|
|||||
![]() Quote:
Use cardboard...its free. You shouldnt be able to see it either. ![]() |
#6
|
|||||
|
|||||
![]() I think you should get 4 screw-in stump legs, similar to what you would find under a common couch and similar to left leg shown below. But a lower profile so you won't see them.
![]() This could also allow for adjustment, a couple washers should do the trick. It might be easier using foam or cardboard but I don't it will work as well, using legs will also make it more stable. |
#7
|
|||||
|
|||||
![]() Yeah I'll have to find something??? Like a box that I can flatten and use... or some kind of small leg??
|
#8
|
|||||
|
|||||
![]() Maybe something like this
![]() |
#9
|
|||||
|
|||||
![]() If you have a stud in the wall right behind the very right of the stand you could possibly use a couple "L" brackets to support it where you need. You also wouldnt be able to see them since the stand sits so low.
|