Contest #1 Nano - New Rock Work

[sphelps]

looking good buddy! But is it good enough?

[rocketlily]

Looks beautiful. Love the stand and built in look.

[superduperwesman]

Originally Posted by rocketlily

Looks beautiful. Love the stand and built in look.

Thanks... I'm happy with it so far... I just need to get my rock work figured out now

[superduperwesman]

So I got some rocks in the tank... only about 4.5lbs in the display but I don't think I'll add anymore cause I kinda like it with lots of open space... I'll try and post some pictures tomorrow

I switched the light bulbs around and the tank seems to be a lot better lit now with the actinic in front... I still might try to lower the light a little later but for now I'm happy

As the stand sinks into the carpet the left had side is just lifting off the ground a touch.. it's not at a risk of tipping over but the floor is already slightly off level so this just adds to the sloped water level inside the tank... so I think I'll have to put a piece of foam or something under the tank portion of the stand to level things out because even if I put the salt and everything in the left lower cupboard it's not enough weight to sink that side into the carpet to level things out

Thankfully the tank is super quite and seems to run at about 82 with the fans off and 80 or less with them on

[sphelps]

Originally Posted by superduperwesman

Thankfully the tank is super quite

Told you

[superduperwesman]

Originally Posted by sphelps

Told you

Well... I still had to strategically place some filter floss in the overflow and I have to run the sump water level really high so I don't have to hear the water trickle over the 2nd baffle... which makes me wonder if I should add one more baffle so that the pump chamber is separate?? Because with the water level so high cheato could float into the return chamber and clog the pump. Maybe I'll just put some egg crate between the refuge and the pump return?

Here's some pictures to better explain what I mean... hopefully??

Noise Problem... not probelm as below ahah


Current Situation... with new problem


Possible Egg Crate Solution??

[sphelps]

Yeah I figured you might have to with the overflow, the water level had to be as low as possible to reduce the first sump chamber, which is still a little too high.

Is the sump level? If the sump is level the water flows against the baffle but if the right side is sagging the water will separate. The eggcrate will work if you want to run a higher water level. You could also hang filter floss on that baffle, the water will have to go down through the floss to get into the second chamber. Don't run the sump too high that you can't turn the pump off.

It would have been better if that second last baffle was taller but that's what you get for working with scraps