Refractometer help

[atcguy]

its best to get some calibration fluid. however just a couple things .. just use 3-4 drops of water flip the plastic cover down and hold it down firmly from the top you think your finger is blocking the light but it isnt . the light enters on the end ... find a bright light bulb and look through the meter at the light... you should get some reading regardless... good luck

[likwid]

Originally Posted by atcguy

its best to get some calibration fluid. however just a couple things .. just use 3-4 drops of water flip the plastic cover down and hold it down firmly from the top you think your finger is blocking the light but it isnt . the light enters on the end ... find a bright light bulb and look through the meter at the light... you should get some reading regardless... good luck

Ya I tried that, I put 4 drops of my salt water in, I can see the division line at the very bottom, I play with the calibration, it moves up, but only a little bit, never above 0.

[Skimmerking]

sounds like that you have a broken one

[mike31154]

Agree, that thing is defective. It shouldn't take much of a turn of the screw to get movement on the scale.

[atcguy]

agreed , broken