|
|
|
|
|
#1
10-20-2008, 05:17 PM
|
|||||
|
|||||
Both of them snapped cracks in the panel just as the drill bit got to the other side. I don't know if I screwed it up or if it's because the glass was pretty thin. It occurs to me I've never drilled anything thinner than 4.5mm before (this was 1/8" or about 3mm thick I think).
 I feel pretty bad about it. I've drilled easily 20-30 holes before and only had glass break on me in 2 or 3 cases, and usually there was a reason. One time it was because I lost my balance and fell forward onto my sump as I was drilling it. Another time was because I was drilling on the vertical into a running tank, probably the riskiest scenario of all.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! 
|
|
#2
10-20-2008, 05:23 PM
|
|||||
|
|||||
|
Like I said yesturday, dont worry about it Tony. It is pretty thin glass and I appreciate you helping me out. I do have alot of scrap glass now thou if I ever need baffles or anything
 Hopefully the attempt tonight goes better as its the last tank I got. Ill let you know tomorrow. If it dont work I might just go order a tank predrilled.
__________________
- John - 3x20g Display Established June 08|Koralia nano, 1, 4|Euroreef Skimmer|250W MH retro kit|Mag 18 return|RODI 120g Display Established Jan 1, 09|Vortech MP40|Koralia 4|I-Tech 100 w Tunze 9410.04A|Aquactinics Constellation 7x54W|Mag 18 return|RODI
|
|
#3
10-20-2008, 05:25 PM
|
|||||
|
|||||
|
oh wow, 1/8"? That would be tricky. I probably would have cracked my 1/4" if I didn't have a clutch on my drill. It snagged just as I was finishing up.
|
Hybrid Mode
