1inch diamond hole saw

Phanman · #1 10-17-2008, 06:35 PM

Thx guys. The reason I need the hole drilled this weekend is because currently I have a 20 gal tank that houses 4 clown fish (2 true percs, 2 blk/wht occs.) They have been fine for about a month and a half together. But when the blk occs come near the anenome the female perc gives them the boot. The blk/wht occs have taken to the frogspawn but as of the last two days the female perc doesnt want them there either, lol. So as long as the occs are not hosting anything then they are fine. But I dont want the female to go crazy one day and start attacking them.

When can i drop by Tony and get the holes done? I'll bring the bulk head as well to make sure the size is correct. I can bring you some coffee or beer if ya like for your help.

Thanks,

Jay180reef · #2 10-20-2008, 04:46 PM

As an aside, I drilled my sumps last night for 2" bulkheads. I got my 3" drill bit from glass-holes.com for $14. They also have a 'how-to' drill a glass hole video on their website.

Phanman · #3 10-20-2008, 05:02 PM

Thx Jay,

I have the 1inch hole saw now. Tony was kind enough to lend it to me. Will be attempting the third tank tonight. First two tanks didnt work out so well so to speak, lol.

Jay180reef · #4 10-20-2008, 05:05 PM

What happened?

Delphinus · #5 10-20-2008, 05:17 PM

Both of them snapped cracks in the panel just as the drill bit got to the other side. I don't know if I screwed it up or if it's because the glass was pretty thin. It occurs to me I've never drilled anything thinner than 4.5mm before (this was 1/8" or about 3mm thick I think).

I feel pretty bad about it.

I've drilled easily 20-30 holes before and only had glass break on me in 2 or 3 cases, and usually there was a reason. One time it was because I lost my balance and fell forward onto my sump as I was drilling it. Another time was because I was drilling on the vertical into a running tank, probably the riskiest scenario of all.

Phanman · #6 10-20-2008, 05:23 PM

Like I said yesturday, dont worry about it Tony. It is pretty thin glass and I appreciate you helping me out. I do have alot of scrap glass now thou if I ever need baffles or anything

Hopefully the attempt tonight goes better as its the last tank I got. Ill let you know tomorrow. If it dont work I might just go order a tank predrilled.

Jay180reef · #7 10-20-2008, 05:25 PM

oh wow, 1/8"? That would be tricky. I probably would have cracked my 1/4" if I didn't have a clutch on my drill. It snagged just as I was finishing up.