|
|
|
|
|
#2
10-10-2008, 05:24 PM
|
|||||
|
|||||
Best way to keep that syphon is with the aid of a vacuum pump, Tom produces one. Also watch the output of the pump, a difference in head pressure or water level will change the output of the feed pump.
|
|
#3
10-10-2008, 05:50 PM
|
||||
|
||||
|
Quote:
|
|
#4
10-10-2008, 06:51 PM
|
|||||
|
|||||
Overflow
Hi there,
You might have something stuck in your over flow, whcih causes sediments to accumalate until they block the pipe, which causes the whole setup to stop. They can then drool down to your sump, so by the time you get in there to clean it up, it all gone. Try giving the inside of your overflow a nice cleaning, if you can pull your pipe, clean it out too. If it is still causing problems, it is probably not the overflow, but rather a pump or something. Does the tank keep filling after the overflow dies??
__________________
100 Gallon Reef, 2 x 250 Watt HQI Giesseman 13000K, Reeflo Dart(3600 gph), E.T.S.S Reef Devil Deluxe, Ocean Clear 325 filter, Aqua UV 25 watt, Korallin Calcium Reactor C-1502
|
Hybrid Mode
