![]() |
|
#1
|
||||
|
||||
![]() your tank should be visual inspected once a year and hydro every 5.. I go to a place in richmond and walk in the back fork over a ten dollar bill and they fill mine.. once they took a look inside as the tank was completly out.,
__________________
Gerad White Rock |
#2
|
|||||
|
|||||
![]() I don't think the annual visual inspection is BS, but to be charged $30 for it? Sounds like a rip-off based on what others are saying.
__________________
Mark. |
#3
|
|||||
|
|||||
![]() Well, I've been filling mine for 6+ years, nobody has visually inspected it, at least haven't told me they did or charged me.
__________________
Brad |
#4
|
|||||
|
|||||
![]() Ya, I was thinking on an industrial level. A privately owned bottle probably doesn't require it. I mean, who that owns a fire extinguisher for their home gets it inspected annually, or is even required to?
__________________
Mark. |
#5
|
|||||
|
|||||
![]() If you were discharging it and getting it refill every 6 months. What's a visual anyways, screwing off the valve and looking inside, screwing the valve back on, 30 bucks?
|
#6
|
||||
|
||||
![]() OK so the consensus is this guy is a scam artist.
It is the fire extinguisher shop by the way and the only place in town I know of that can fill CO2 tanks. I will look into a beverage distributor or else going to Terrace to fill the tank.
__________________
120 gallon sps/anemones/LPS reef since 2004 Apex controller 8 x 54 watt T5 PowerModule Herbie's silent overflow system Jebao DC 12000 return pump Jecod CP-40 Cross-flow circulation device Mini Bubble King 180 Barr Aquatics calcium reactor Bucket fuge |
#7
|
||||
|
||||
![]() It may be a high price but the law in B.C. is that all pressurized refillable containers will have to go through an inspection. This includes propane cylinders and co2 etc, it also includes compressor tanks. The time frame for these tests is determined by the ""Yuk"" government. I dont know if it is a $30.00 fee for your container, try phoning worksafe B.C for the link to the site that monitors this...I agree that most of it is crap, but I have also seen what a pressurized cylinder can do when it lets go....
|
#8
|
|||||
|
|||||
![]() Quote:
I believe so. For SCBAs anyway. But if I could beat the fire extinguisher thing to death a bit more....I'm pretty sure it's not done for those in that manner. At work we are required to have our extinguishers inspected annually. The contractor does this on site. They are not screwing any tops off and looking inside. They just basically give the exterior a once over...check the gauge (or weight in the case of CO2 ext)...and attach a new tag. I've witnessed it. It's nothing special. We basically do the same thing once a month as part of our routine checks.
__________________
Mark. |