|
|
|
|
|
#1
09-13-2008, 04:46 PM
|
|||||
|
|||||
The only locline I've seen on the end of 1" pipe is 3/4". Compensate for the pinching with additional outlets. I run ~2000gph (after head losses) in my 110g through 4 3/4" locline outlets with flared nozzles. There's no flow restriction. You can also get Y adapters to make a dual outlet at each location if that makes it easier.
I'd get Kevin to check into that for you, but, personally, I think what you're going to find is it's 3/4" after all. But maybe I'm wrong. My suggestion, order some and find out. 
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! Last edited by Delphinus; 09-13-2008 at 04:49 PM. 
|
|
#2
09-13-2008, 05:18 PM
|
|||||
|
|||||
|
For 1" you will need to use the OM stuff.
__________________
250 BB Starphire SPS, clams, & zoos 3 x 250 DE, IC 660 W/T5s OM 4-way, Hammerhead Pump Calcium, Kalk, RO filters, magnesium, Excellent prices
|
|
#4
09-14-2008, 03:24 AM
|
|||||
|
|||||
|
I had no luck finding my box of spare plumbing parts. Sorry!
|
|
#5
09-14-2008, 07:43 PM
|
|||||
|
|||||
|
Quote:
Does anyone know if I can get a 1" -> 3/4" reducer ring then?
__________________
180G Office Reef. Started Sept 2012 http://www.canreef.com/vbulletin/showthread.php?t=88894 62G Starfire Reef. Started Jan 2013 http://www.canreef.com/vbulletin/showthread.php?t=89988
|
|
#6
09-14-2008, 10:47 PM
|
|||||
|
|||||
|
Yep, should be able to find a 1" slip to 3/4" threaded bushing at HD and/or Rona.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
Hybrid Mode
