![]() |
|
#1
|
|||||
|
|||||
![]() I'll start a different thread on depth later on
![]()
__________________
Brad |
#2
|
|||||
|
|||||
![]() I take it you don't agree.
![]()
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#3
|
|||||
|
|||||
![]() Well, yes and no. Kinda. The thing is, I don't think you need sand at all, and if you use it, is 2 inches bad where 4 inches is good? If so, why? If not, why not? Don't worry, we'll get our own thread going
![]()
__________________
Brad |
#4
|
|||||
|
|||||
![]() is it loose clumping or hard clumping? loose clumping is usually from sticky biofilms from excess dissolved organics,hard clumps is usually calcium carbonate binding
__________________
but what the heck do i know |
#5
|
|||||
|
|||||
![]() Another good way to tell why its clumping is to put the clump into some bleach water, if it falls apart its excessive organics if vinegar is the only thing that breaks it apart its calcium
|
#6
|
|||||
|
|||||
![]() If it is precipitated calcium, then 10 bucks says your magnesium is less then 1300 ppm.
![]() What are your calcium, alkalinity, and magneisum levels?
__________________
250 BB Starphire SPS, clams, & zoos 3 x 250 DE, IC 660 W/T5s OM 4-way, Hammerhead Pump Calcium, Kalk, RO filters, magnesium, Excellent prices |
#7
|
|||||
|
|||||
![]() Are you using Kalk to support Ca/Alk? That clumping can easily occur with heavy Kalk dosing.
__________________
400 gal reef. Established April, 2007. 3 Sequence Dart, RM12-4 skimmer, 2 x OM4Ways, Yellow Tang, Maroon Clown (pair), Blonde Naso Tang, Vlamingi Tang, Foxface Rabbit, Unicorn Tang, 2 Pakistani Butterflies and a few coral gobies My Tank: http://www.canreef.com/vbulletin/showthread.php?t=28436 |