|
|
|
|
|
#1
08-27-2008, 10:23 PM
|
|||||
|
|||||
OK so today was the day to get it all going.
2 small problems I have encountered. Temp probe always reads 102F This probe is the Larger Black ones Also the Redox Calibration required a Null plug. What is this and how can I get one. Thanks J |
|
#2
08-27-2008, 10:40 PM
|
|||||
|
|||||
|
102F !!
Make sure you have it in the right port. The Null plug is always supplied with the ProfiLux EX or Redox expansion always. This was S/H right? |
|
#3
08-27-2008, 10:44 PM
|
|||||
|
|||||
|
Yes It was second Hand. I will try and get it from the guy I purchased it from.
Could you tell me what it looks like? Triple checked the port. It's the lower port on the board J |
|
#4
08-27-2008, 10:46 PM
|
|||||
|
|||||
|
Best to email me at sales@aqua-digital.com
it is always hard supporting second hand units and we could be going back and forth for a while on the board. |
|
#5
08-27-2008, 11:01 PM
|
|||||
|
|||||
|
E-mail Sent
J |
|
#6
09-06-2008, 04:15 AM
|
|||||
|
|||||
|
Michael, Just wanted to thank you for your support on my Temperature probe issue. Spencer at Progressive Reef hooked me up with a new probe and all is right in the world now.
Thanks Again Jason |
|
#7
09-06-2008, 12:40 PM
|
|||||
|
|||||
|
Glad to be assistance and thanks to Spenser at progressive reef in BC for helping you get up and running.
|
Hybrid Mode
