Ghl Profilux Discussion And Support Thread

[niloc16]

thats right jason. just make sure they go into the in rush amp sockets. if you have them in the other ones it sometimes causes the relays to stick and you have the light stuck on

[Jason McK]

Thanks Colin

J

[Patrick1]

Hey Michael,

I was wondering if you could find me a copy of the 6 plug digital powerbar instructions. I belive when I got mine it came with a sheet with some operating info on it.

[Aqua-Digital]

http://www.ghl-kl.de/Produkte/Aquari.../download.html

[Jason McK]

Is there an indecation on the power bar as to what version they are?

J

[Aqua-Digital]

Yes

the front lable of series one states what sockets are high in rush protected, the series 2 do not haver this wording as all are high in rush.

Also series one have internal fuses, series 2 dont

[Jason McK]

Originally Posted by Aqua-Digital

Yes

the front lable of series one states what sockets are high in rush protected, the series 2 do not haver this wording as all are high in rush.

Also series one have internal fuses, series 2 dont

OK So the series 1 are what are described in the wiki site. While series 2 I would assume are all 6.3AMP all rush protected?

Thanks again
Jason

[Aqua-Digital]

No

series 2 are all 200amp YES two hundred amp high in rush protected that means that every single socket can withstand a split second high in rush current surge of up to 200amps protecting it from damage from ballasts that draw huge ampage on striking.

This does not detract from the fact that the total duration load (not striking load) must not exceed more than 15 amps in total on the whole bar, this is in line with your household ring main.