mseepman's 16" starfire nano

mseepman · #1 08-21-2008, 06:09 PM

Thanks for the info JDigital.

I have a question on bulkheads...mine are slip on the bottom and thread on top. The 3/4" adapter I have to thread into the bulkheads doesn't seem to thread very easily. Do people use silicon to make it go easier or lubricants? Shouldn't the PVC threaded adapter screw all the way into the bulkhead?

JDigital · #2 08-21-2008, 06:50 PM

Quote:

Originally Posted by mseepman

Thanks for the info JDigital.

I have a question on bulkheads...mine are slip on the bottom and thread on top. The 3/4" adapter I have to thread into the bulkheads doesn't seem to thread very easily. Do people use silicon to make it go easier or lubricants? Shouldn't the PVC threaded adapter screw all the way into the bulkhead?

It should... unless the adapter has been cross-threaded somehow.

mseepman · #3 08-21-2008, 08:24 PM

Quote:

Originally Posted by JDigital

It should... unless the adapter has been cross-threaded somehow.

I've check both my bulkheads...no cross threading. It's just a really tight fit that I've never tried to push past the first 5 threads or so just in case I couldn't get them apart again.

mseepman · #4 08-22-2008, 04:00 AM

Well I continue to try and move this nano project forward. Tonight I started plumbing the SCWD that will provide flow from my return pump. I will be using a Quietone 3000 which I hope will have enough juice considering it's only about 4 feet of head. I ran into some trouble with keeping the piping to conform how I wanted it to behind the small 16" tank, as such I was forced to consider using 90's. I know they cut down on the flow but I'm hoping that this will still work. I found some new fittings at Home Depot so I thought I would try them...works like a compression fitting.
Here it is so far:

Once I get everything plumbed, I decided that I would use EcoRox from BRS. I saw them in Gools new tank (which is looking great) and really liked the look.

I plan to seed it with another 5lbs of Live rock I have already.

Myka · #5 08-23-2008, 12:31 AM

Looks awesome Mark!!! Having never done the Herbie myself, but reading a lot, I would keep the emergency drain where you have it as well.

mseepman · #6 08-23-2008, 01:01 AM

Thanks Myka...this seems like the never ending project because I just can't get everything done. The more I read, the more I think I have to do before I start the tank.

I've been reading a lot on the Herbies...I do know that quite a few people have said that they have a slow trickle down their emergency pipe because things seemed more stable when they did this. I think it will be a bit of trial and error.
I've ordered new bulkheads because I just wasn't really happy with the ones that came with the tank. For some reason, my plumbing just wouldn't thread properly and I'm hoping new Bulkheads will fix this problem.

Myka · #7 08-23-2008, 05:59 PM

Why don't you just not glue the end of the overflow pipe, and then you can shorten and lengthen it without redoing the whole thing to find out what works best for you?

Can't wait to see the tank up and running. But when you do get that far I'll feel pretty bad about not having my cube setup!!! I have to change the design plans now though as I can't get the slate for it anymore...