|
|
|
|
|
#1
08-15-2008, 04:32 PM
|
|||||
|
|||||
Color on test kits for PH ect are usually between somewhat. I found they never really match the piece of paper.
You should buy yourself a calcium, alkalinity, and magnesium test kit next. If you want to run a reef you will have to keep these in check. Buy the Salifert ones they are good and not too hard to use. You can also get a PH probe that will give you a more exact reading on your PH.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. 
|
|
#2
08-15-2008, 04:35 PM
|
|||||
|
|||||
|
Your SG should be stable at 1.025 for reefs.
With your ATO you should be able to keep this consistent.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
|
#3
08-15-2008, 04:50 PM
|
||||
|
||||
|
Thanks... Thanks... and Thanks...
Don't know what to say but thanks, thanks, and thanks... for all your helps.
I found this is most helpful method of learning and studying. --- Sorry, I didn't think about making a jorney of my tank from begining. It was so busy and I built the system with those "little free time after diner. Forgot to take pics along the way...huhuhu... 
|
Hybrid Mode
