![]() |
|
#1
|
|||||
|
|||||
![]() If you have "proof" relating to why people should use a ground probe in there aquarium I'm sure many people would appreciate you posting it here. I still don't see how all these codes you're referring to relate to aquariums.
I'm sorry if you feel I'm trying to "debate" this topic but when I give an opinion relating to such a serious topic I just feel it's a good to give reasoning. Call it what you want but how can you expect people to take you seriously if you can't give them explanation? Article published by that Georgia Tech professor |
#2
|
|||||
|
|||||
![]() Monti-Man, my husband is an electrician and he would agree with you. I have been given crap often for not having a ground probe in a sump as well as the tank and what-not..
![]() Tony, just out of curiosity, is the pump leaking voltage a Sedra? We had two Sedras do that to us. Last edited by EmilyB; 07-28-2008 at 08:00 PM. |
#3
|
|||||
|
|||||
![]() another option is to run a couple of GFIC circuits and the ground probe, only the one with the problem will trip if something goes wrong. i have 4 different GFIC's in my setup, just for this reason. also many recommend not plugging your main pump into a GFIC, this can be dangerous but not so much if you have a ground probe in the sump.
just some thoughts......
__________________
` 120S RR tank with 60G basement sump / fuge Return Pump: Little Giant 4-MDQX SC Water Movement: Seio 1500, (2) Hydor Koralia 4's Lighting: 400W SE MH with 14K Aqua Connect Skimmer: Euro-Reef RS250 with gate valve Other: RODI, RDSB, PO4 / AC reactor |
#4
|
|||||
|
|||||
![]() Quote:
His tank and Bio are very impressive. How many people design and build their own computer systems to run the tank lighting. Very nice
__________________
250 gal display tank plumbed directly to my wallet |
#5
|
|||||
|
|||||
![]() Quote:
![]() Leaky Tunze stream pump. No ground probe, shocked when contact with halide pendant and water or as in my case, lightning arcing from the reflector to my forehead. ![]() Ground probe in tank or sump, no shock. But then I would never had know my pump was bad. ![]() Tony, my GFI never tripped at first when I was shocked, but if you remember the thread it did later and also the GFI/Arc Fault. This was after the ground probe was back in but no idea if that had anything to do with it then tripping the GFI circuits or does it take a certain amount of voltage leak to do so ??
__________________
Doug Last edited by Doug; 07-28-2008 at 11:00 PM. |