![]() |
#21
|
|||||
|
|||||
![]() The flow rate through your ZEO reactor Somewhere between 50-75gph, alternating three hours on, three hours off.
Up the flow rate to 75-100 GPH keeping the on/off schedule Remember that the ZEOlite rocks must be covered by water when the flow is off for three hours. Tom R |
#22
|
|||||
|
|||||
![]() Yeah....the rocks in my reactor were always submerged.
|
#23
|
|||||
|
|||||
![]() Quote:
![]() |
#24
|
|||||
|
|||||
![]() Ok, I changed my DI resin out and I'm getting a consistent TDS reading of between 0 and 1.
|
#25
|
||||
|
||||
![]() Zeovit isn't a bandaid to smother out other problems. Any probiotic methodology will have strict guidelines that need to be monitored and adhered to.
From the sounds of it, your reactor isn't breaking in properly and you're still stuck in Phase 1. Drew, try this: Reduce the flow rate to 50 gph or so. Cut the use of any animo acids and/or auxillary supplements (iodine, iron, etc), stick to the basic four. From those, and as mentioned above, I'd do the following: ZeoBak and Zeofood 2-3 drops daily for the first week after your exchange, switch to twice a week thereinafter. Make sure you're dosing near the feed pump of the reactor and only when it's on. Zeofood should be added at .25 mL twice daily, again, near the pump and while it's on. Since this is within your first rock exchange, hang on. Sometimes, establishing the zeolith filter is a PITA, but once you hit phase 2/3, it's smooth sailing. HTH
__________________
This and that. |
#26
|
|||||
|
|||||
![]() Quote:
Excellent! this is a great start, try the other suggestions and see what happens. |
#27
|
|||||
|
|||||
![]() That in itself is reason enough. I want to enjoy my tank, not spend more tim ein the sump room. RO water in, water changes bi-weekly out, smart feeding, efficient skimming, and I think that's all I need
__________________
Brad |
#28
|
|||||
|
|||||
![]() I had great success with zeovit. If you are not you may want to try running ozone with the Zeovit but only OCCASIONALLY. I found that once I initially brought up the orp in my water from approx 180 to 320 it stayed in that range almost on its own (unless I fed heavy) I think once you remove the excess nutrients and organics from the water(with the ozone and skimmer) you have a much better chance keeping away pesky algae blooms. I had crystal clear water and the colour I had with my corals was awesome.I know that zeovit doesn't suggest running ozone with their product but I don't feel I had any problems due to it. I'm gonna use Zeovit again on my next tank. The only real kicker with Zeovit in my experience is the price.
__________________
300 Gal 6x3x28 high Starphire peninsula w/external herbie/bean animal hybrid +150 Gal custom sump with 30gal fuge section, (both built by Concept Aquariums Calgary), 3x Ecotech Radion xr30w g2's(soon to be G3 Pros), Jebao DCT 12000 return pump, 2x Jebao RW 20 powerheads, Tunze Ato, Vertex ro/di, Reef Octopus Ext 200 skimmer run internally. |
#29
|
|||||
|
|||||
![]() Wow Man that is alot of maintaining to get your tank looking like a picture. Well I use heavy skimming, CArbon, and Phosban, along with Kalk and i dont get that green algae build up i may get the odd Bubble algae on a patch here and there andthat is it. Or some rel turf that covers the rocks ,but then the phos ban takes care of that. the ocean doesn't use Zeo and look at what it looks like, yes i know that the ocean has all the proper supplements in to house what ever and the proper lighting and the corals to react to what ever mother nature throws out.
But i do know taking your time in doing water changes and getting good quality rocks and feeding the right amount and not over stocking your tank will give you the satisfaction of a nice looking tank. Yes all tank are different and do cycle different but that is what makes this hobby great understanding what has to be done and doing it to your time allowance. REEF Roids Zeo and other products may have the right solution, and cost money. Well its not for me old fashion is the way to go in my books.. you tank will always have something wrong with its not like the ocean.. that is just my Opinion
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
#30
|
||||
|
||||
![]() Quote:
Anyone can run GAC, GFO and O3 and get a decent - good looking tank. Probiotic tanks, however, are on a whole different level. Take a look at the Interzoo pictures; the colors are AMAZING!. I friend of mine just came back from there and his comments went along the line of "Yeah, you know that new program? The new photoshop that you install on your fish tank instead of your computer? Yeah, they used it on those corals there. Speaking of colors and ULN systems, you know what never fails to amaze me, people always talk about how pastel European corals look and never pause to consider the fact that pastel colors are some of the hardest to maintain. It's easy to have a super metallic Green Slimer or a deep, deep Red Robin Millepora, but someone out there pick up a Baby Blue Gemmifera and keep it looking like over 20 generations in the same (non-ULN tank) and I'll show you an unusually talented aquarist! As far as the ocean not using Zeo? No, not in the way imagine it doesn't, but there are bacterial processes happening there that you will not be able to replicate using GAC, GFO and O3. Trust me, Zeovit is about as close to the Ocean as a reef tank gets, my friend. This keeping in mind that the ocean ISN'T a closed system like our tanks either. Quote:
Quote:
Personally, I'm glad our hobby allows room for everyone to achieve success in different ways, so cheers to that!
__________________
This and that. Last edited by albert_dao; 07-24-2008 at 05:32 PM. |