Ghl Profilux Discussion And Support Thread - Page 5

Todd · #41 06-26-2008, 05:52 PM

Quote:

Originally Posted by Aqua-Digital

Do you have series 1 or series 2 power bars?
All 15 amp sockets or 8 and 15 amp?

I am not sure, I got a '6 way digital power bar' July of 07. How do I tell if it is a series 1 or 2?

Quote:

Originally Posted by JoelV

I have heard of this problem before with Non Profilux equipment. When it comes to a high amp draw like a metal halide light, The plug heats up and cools down (Expands and contracts) more so if the plug is not seated well. Over time the metals warp and no longer connect well.
I would first try and replace your male end with that of a thicker one (Yellow replacement cord end )
the prongs are a bit thicker and may fix the problem of a a worn outlet.

A 'worn' outlet seems plausible - The plug on my MH is already a big thick one and I would also like to use that outlet for other equipment. Is there a way that I could replace / fix that outlet besides using bigger plugs?

Quote:

Originally Posted by Matthias Gross

@Todd:
maybe only a broken fuse

I don't think that it is a broken fuse because If I wiggle whatever is plugged into the outlet I can get it to work sometimes. Regardless, how do I check if the fuse needs replacing?

niloc16 · #42 06-26-2008, 06:09 PM

i'm not sure the exact length but i'm using the connection cables that came with the units so whatever the length of each cord times 3

Matthias Gross · #43 06-29-2008, 08:56 AM

@Todd & Niloc

please contact me directly for personal support:

matthias.gross@ghl-kl.de

Patrick1 · #44 07-15-2008, 11:20 PM

Silly Question. How many Tunze power heads can I control with the profilux??

Aqua-Digital · #45 07-15-2008, 11:44 PM

total of 8

Patrick1 · #46 07-15-2008, 11:48 PM

Ok I am planning on running a total 4 tunze 4055's. 2 on each side of the tank for that awsome wave action. I currently have the tunze line one & the tunze line 2 is there any thing else I will need ??

Aqua-Digital · #47 07-16-2008, 12:35 AM

You will require a further T1 and T2 and YL2-1 splitter

Patrick1 · #48 07-16-2008, 12:43 AM

Thanks Michael,

I will call Joel this week and set up an order. On Another topic any idea on the GHL chiller prices??

Aqua-Digital · #49 07-16-2008, 12:55 AM

Yep GHL PTC prices are with dealers there is a promo on right now.

Release date first week of August, only 3 months late

Patrick1 · #50 08-06-2008, 03:56 PM

Hi Michael,

So I have finaly picked up my tunze's. I have 4 x 4055 and I am planning on running 2 on each side of my tank. So my goal is to set up a simple left then right flow. I currently have 2 of each t1 and t2 lines. Also 2 splitters however I only have 1 free port. I assume I am going to need another splitter yet is this correct???