![]() |
|
#1
|
|||||
|
|||||
![]() My tank has always had problems with heat, everything is sealed up so it holds the heat in. Even in the winter the tank will reach 82 degrees without cooling. I don't like the idea of chillers and simply running fans produces way too much humidity in my place. So I build an evaporative cooler that allows me to vent the humid air outside.
![]() ![]() ![]() I connected a 3" PVC pipe line to connect the cooler exhaust air to an outside vent. ![]() The cooler is capable of lowering my tank temperature up to 4 degrees in normal conditions, works very well in the winter but I'm yet to find out how well it works in the summer with the extra heat and humidity. So far I've had to keep the room temp below 25 degrees C. |
#2
|
|||||
|
|||||
![]() I used to use frozen pop bottles, worked well but took up alot of room in the freezer. Currently I have a fan blowing across the surface set on a timer for the hottest part of the day (usually 5 hours of run time). This seems to be keeping the temp under control. Would love to get a temp controller that would kick in the fan once the tank hit a certain temp though.
|
#3
|
|||||
|
|||||
![]() I have a chiller to cool the tank and a fan to cool the chiller and an AC unit to cool the room the tank is in
![]() ![]() Speaking of which, I need to stock up on those fuses, one blew the other day and it wasn't even that hot out ![]()
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#4
|
|||||
|
|||||
![]() sphelps,
Can we get a separate thread with your very cool DIYed evap cooler? I want to ask you questions but don't want to clutter this thread. |
#5
|
|||||
|
|||||
![]() This will be my 1st summer in BC with a tank so I don't know what will happen if/when it gets really warm.
In the UK I used to use this attached to a fan. ![]() And this attached to my heater. ![]() It worked a treat & my tank temperatures never swung more than a degree or 2 all year round, even on a 15 gallon nano. They're made for reptile tanks & the only mod you have to do is to silicone the ends of the temp sensors to water proof them. Does anyone know where they sell these things or something similar in Canada? LInk to Habistat . |
#6
|
|||||
|
|||||
![]() Well, I'm thinkin' we need more details on this device!!
__________________
Brad |
#7
|
|||||
|
|||||
![]() Quote:
That's a really neat idea. I like the idea of not having equipment work against each other (lights heating things up, chiller keeping things cool ect). One idea I had thought about in the past along similar lines is to install a rain-water heat exchanger. Basically have a reservoir stored outside in a cool area that is filled with rainwater, then have a titanium heat exchanger install in the reservoir and have a pump turned on at a certain temperature that would run the heat exchanger. The only problem would be the water that is needed to fill the plumbing would cause varying levels in the sump (and salinity swings due to auto top off). I know that you can get heat exchanges from chiller companies, but have yet to try this because I am renting right now.
__________________
My Tank: 135G display, 45G Sump, 20G top off. 2 x 400 W, Bullet 1.5, Snapper Return, Profilux. ------------------------------------------------------------------------------------------------------ My Photo Website |
#8
|
|||||
|
|||||
![]() Should be interesting this year with glass top + metal halide now. Last 2 summers I have had no problem with my cube getting warm. If I left the feeding door on, the temp would get around 85F, with it off, it stayed stable at 79. I run my AC at 24C from noon till 7pm on hot days
__________________
28g Nano Cube drilled with 13g sump in stock stand. Vertex IN80 Skimmer, Phosban 150 Reactor, Apex Controller, DIY LED with stock hood, dimmable Established March 2006 |
#9
|
|||||
|
|||||
![]() Being in the Okanagan, heat is a serious concern. I have a clip on fan that blows across my sump that comes on when my MH's come on from fall to spring and I have it come on when my PC's come on in the summer. I have an in-wall AC in the room the tank is in and a portable AC unit that I have in the adjacent room. In the summer both units are set up to run on timers. The problem with this is that they come on even when they are not needed.
I've started to look for a plug-in thermostat that could control the units. But so far have only found them in the States. ![]() http://www.acehardware.com/product/i...ductId=2151140 I'm heading to Kelowna this weekend to hunt for some there and if anyone knows where I can find them please let me know. Cheers
__________________
Setup Mar 2004 50g tank 23g DIY Acrylic Sump\Refugium Sold Dec 2009 ![]() Vacation Fun: http://members.shaw.ca/cabin54/ |
#10
|
|||||
|
|||||
![]() Quote:
__________________
CadLights 39G Signature Series Started April, 2008 |