new DIY downflow calcium reactor

[kari]

Cool domed top.
What kind of bit did you use to drill thru the tube side wall?

[untamed]

Nice work. Are you going to be able to pull that probe out easily for recalibration?

[Doug]

Great looking work Chin. I dont know how you guys do that.

[Tom R]

Now that is a Calcium Reactor.

Great job Chin.

As per the show Tool Time:

It is the Binford 8000 double capacity powered by a Sedra 5000.

Ar Ar Ar Ar

Tom R

[Chin_Lee]

Originally Posted by kari

Cool domed top.
What kind of bit did you use to drill thru the tube side wall?

Kari - i traced out the OD of the 3/4" pipe then drilled and dremel grind until the pipe can fit through snugly. I then grinded down the union and coupling fittings to contour of the OD and ID curve of the tubing.

Originally Posted by untamed

Nice work. Are you going to be able to pull that probe out easily for recalibration?

I'll recalibrate every time I change the media and I'll just unscrew the gland nut with the probe as a whole and then screw it back in. I used gas teflon tape on the threads so its easy to remove.

[Jason McK]

Sweet Chin. Really like the design. So when you say you have a removable media chamber that is the screws on the bottom and the screws on the top then you can pull just the chamber away from the pump and PVC? That is sweet.
SO what's your retail price and are you taking orders

J