|
|
|
#11
04-05-2008, 08:43 AM
|
|||||
|
|||||
Ya, Dynamat adds MASS to whatever its attached to, makes that harder to vibrate with sound waves. I am looking for Absorbing. Like the eggcrate type foam that you see in anechoic chambers used for sound measuring.
__________________
Dan Pesonen Umm, a tank or 5 
|
|
#12
04-05-2008, 10:01 AM
|
|||||
|
|||||
|
The egg crate type foam helps with reduction Hi frequency sound waves reflecting off of surfaces (echo)and thats why its so good for sound measuring rooms,but as its a lightweight open cell foam it wont do much for the reduction of sound waves transmitting Through the surfaces of the stand itself. Thats why i would like to try a few different materials, in layers as this is the best method for reducing sound. I have seen a few products that i believe that will work well. I just cant remember the brand names or where to get them here in Vancouver i know they are available as i see them on allot of different job sites. So ill make some inquiries when I go to work on Monday.
__________________
72G bow front 130+ lbs live rock All in one D.A.S sump/skimmer bx1/fresh water top up (bx1= deltec turbo 1250) Currently building a 36x36x24 90g,sequence dart,OM 4 way 2' in 1 1/2 out external overflow,blueline overflow return pump. System Has to be near silent. Single reflector must be rectangular and have enough output for sps on top 2/3 of tank,wherever they are placed. Last edited by mastergunsg; 04-05-2008 at 10:10 AM.
|
Linear Mode
