|
|
|
#1
04-04-2008, 04:48 AM
|
||||
|
||||
LF starfire glass
Howdy!
Does anyone know if any of the glass shops in Calgary sell starfire glass? What is the cost difference between starfire and regular glass? 
|
|
#3
04-04-2008, 01:51 PM
|
|||||
|
|||||
|
Ya the prices are ridiculous for local glass shops i was quoted between $32- $36 per square foot from 4 different places here in Vancouver without any work on the edges, glasscages.com sells it for $15. To put that into perspective, for the 4 pieces of starfire glass that i would buy at a local glass shop. I received a quote from sea-star to build and deliver and entire aquarium (starfire 3 sides) for around the same price that included the drilling 6 holes, euro bracing,durso overflow,glass overflow box,all bulkheads,edge working the glass.
Now its all the labor involved in replacing the glass if doing it yourself. IMO if you are doing anything more than just the front of an existing aquarium you would be better off buying a new aquarium from a reputable local aquarium maker in your area.
__________________
72G bow front 130+ lbs live rock All in one D.A.S sump/skimmer bx1/fresh water top up (bx1= deltec turbo 1250) Currently building a 36x36x24 90g,sequence dart,OM 4 way 2' in 1 1/2 out external overflow,blueline overflow return pump. System Has to be near silent. Single reflector must be rectangular and have enough output for sps on top 2/3 of tank,wherever they are placed. Last edited by mastergunsg; 04-04-2008 at 01:55 PM.
|
|
#4
04-04-2008, 02:16 PM
|
||||
|
||||
|
Talk to Mitch at Bow Valley aquariums, he has starphire glass at reasonable prices.
|
|
#5
04-07-2008, 09:58 PM
|
||||
|
||||
Quote:
 and pulled out my mastercard! If anyone is looking for glasswork (holes/baffles etc) or for panes of glass, I would strongly recommend calling Mitch before wasting a minute calling anyone else! (also has a great price for drilling holes AND includes the bulkheads in the cost)
|
|
#7
04-08-2008, 01:25 AM
|
|||||
|
|||||
|
Quote:
Starphire glass should be about double the cost of regular glass. $10 a square is a good price for 10mm (retail) The fab work is where the cost is though holes and polish add up.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
|
#8
04-08-2008, 01:29 AM
|
|||||
|
|||||
|
Unless you are 12mm or thicker you can't really notice the difference so in my opinion unless you go 12mm or more it is not worth the extra cost.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
|
#9
04-08-2008, 01:51 AM
|
||||
|
||||
|
careful!
quote:
Talk to Mitch at Bow Valley aquariums, he has starphire glass at reasonable prices. be very careful with mitch, he has tendancys to take your money and blow it and never make the tank. then when you start asking questions a few months down the road he has no cash and no supplies to get the job done, and when he does it he is also known for selling your stuff to the first person there for cheap! he is cheap so he can draw people in and take their cash! its best to do buisness with a reputable company and pay the difference, at least your getting something in return. ive heard this from many people and buisnesses, very reliable sources!!!
|
|
#10
04-08-2008, 02:25 AM
|
||||
|
||||
|
Quote:
As for my personal application...I am placing this tank as a "pony wall" to seperate my living room from dining area. It will be set with 1 short end to the wall (2 long and 1 short viewing sides). So for looking THROUGH the entire tank (long side to long side) will amout to 20mm of glass. Worth the money...IMO
|
Linear Mode
