![]() |
|
#1
|
|||||
|
|||||
![]() Good luck with the build!
![]()
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#2
|
|||||
|
|||||
![]() Cool. I built my acrylic 60g and i found that to be a really fun project. I might try my hand at a glass tank come this summer. Do you think you could post some details/tips about how you like to silicone your tanks together?
|
#3
|
|||||
|
|||||
![]() Sure, I'll make sure there are lots of photos of the actual tank assembly. Anything in particular you would like to see?
|
#4
|
||||
|
||||
![]() I would like to see how you prepare and then apply the silicone. Also a list of the materials used and where you got them from would be nice,,and lots of pic's.....
![]() |
#5
|
|||||
|
|||||
![]() Water in it yet?
![]() Whats the timeframe on your build? Or you just going to work as you can sort of thing?
__________________
I once had a Big tank...I now have two Huskies and a coyote |
#6
|
|||||
|
|||||
![]() I wouldn't be confident in my own building skills to take on a project like that
![]() Must be a lot easier getting the "tank" into the house when it is in parts rather than a big glass box eh?
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2 |
#7
|
||||
|
||||
![]() Could you tell us the price difference between u-build and pre-assembled? $ or % is fine. Have fun.
![]()
__________________
150 G mixed reef. ![]() |
#8
|
||||
|
||||
![]() just wondering this is going to be a sw setup right? did they drill holes aswell. if so what did it cost for the whole package??
|