|
|
|
|
|
#1
03-21-2008, 10:51 PM
|
|||||
|
|||||
Ok heres a couple pics. Not real good ones but hope you can see what I'm talking about.
 
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 
|
|
#2
03-22-2008, 12:00 AM
|
|||||
|
|||||
|
My tank is the same as you're talking building yours.
The overflows are about even with the bottom of the trim and with the return running, you can't see the water line below the trim and have the 3/4" clearance from the brace.
|
|
#3
03-22-2008, 12:54 AM
|
|||||
|
|||||
|
So you dont think that there will be any issues there only being 3/4" clearance between the top of the overflow and the top of the tank? All the lfs dudes Ive asked say I should have around 2" clearance.
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694
|
|
#4
03-22-2008, 01:30 AM
|
|||||
|
|||||
|
Guess would say to the LFS guys to explain the problems. Mine's been up for +2 years and I can't think of anything.
If I did have the 2" clearance then I'd be looking at the waterline and the salt creep above, something personally I wouldn't want.
|
Hybrid Mode
