![]() |
|
#1
|
|||||
|
|||||
![]() In one week? Wow, that settles it, I'm setting my reactor up tonight.
![]()
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#2
|
|||||
|
|||||
![]() Go for it Tony
![]() I actually just moved some of my new SPS pieces down in the tank becuase they were starting to burn becuase the light is penetrating deeper in the tank.
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2 |
#3
|
|||||
|
|||||
![]() For better or for worse, I got the reactor set up and running last night. Was a bit dicey getting my sump cleaned up and ready for a reactor (the main reason I'd been holding off .. I hadn't cleaned out my sump in a while
![]() Quick question (for anyone reading this), the top 1" of media in my reactor is above the waterline when the pump is off (I'm doing the 3-on/3-off thing). Think that's a problem? Or should I just switch it to 24/7 and have it cranked back? I have it cranked back to about 1/2 flowrate already.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#4
|
|||||
|
|||||
![]() Hey Tony, Yes having the rock exposed to air during the off times will render the rock ineffective. I would think that at 1/2 flow now you could run it 24/7. or cut it back alittle more just in case.
J |
#5
|
|||||
|
|||||
![]() Thanks J
![]()
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#6
|
|||||
|
|||||
![]() I had the same problem when I set my reactor up, because of the water level in my sump there was an inch or two of the rock exposed to air when the pump was off (I had it 3hours on 3 hours off) What I did was decide to trottle it back a bit and run it 24/7. The pump on my rector is rated at 200gph and zeo says max 100GPH so I moved the ball valve to the 50% position and then turned the valve to about 50% of that.. just really a trickle going through right now but the results speak for themselves.
I've been dosing .5ml zeostart in the morning and night and 4 drops of zeofood7 and zeobak in the sump beside the reactor pump at night. I clean the zeolites with 15 strokes morning and night. I am also dosing 4 drops of sponge power and amino acid direct in the display ever night and I'm dosing 2ml of coral snow in the display every second morning (it makes the water cloudy for about two hours so I decided to do it in the monring before I go to work so it is clear when I get home) I'm no expert on zeo at all but it you have any questions on the dosing let me know ![]()
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2 |
#7
|
||||
|
||||
![]() I'm here too
![]()
__________________
This and that. |
#8
|
|||||
|
|||||
![]() It's a shame you didn't get to sell me my zeo system Albert
![]() ![]()
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2 |