Can you post a pic of your aquasafe unit set up?

Der_Iron_Chef · #1 02-27-2008, 11:50 PM

The black 1/4" hose is waste water from the RO/DI unit. I think I had to purchase three separate pieces to make this work, actually: the "y" adapter, the valve, and then the piece that connects the 1/4" hosing to the valve. I don't EXACTLY remember

....

From a different angle:

This is my unit as it looks right now. Because I'm cheap, I didn't fill the DI canister full of new resin, and so I just tip it...lol. Whatever--I consistently get a TDS of 0 when all is said and done

Note that, in this picture, the "waste water" tubing is yellow, but in the above photos, it's black. I just have them connected together because I didn't have one single piece of 1/4" tubing long enough at the time, and didn't want to make ANOTHER trip to Rona! Same thing applies to the tubing that feeds the unit. In the first two pics, it's clear, and in the above pic, it's white. Again, I used two pieces. I hope this doesn't make things even more complicated.

digital-audiophile · #2 02-28-2008, 12:43 AM

Sweet! So that last cannister that is ontop is not required to be hooked up then eh?

Der_Iron_Chef · #3 02-28-2008, 12:52 AM

Correct. That's used if you're making drinking water, I believe....but water coming out of it will have a higher TDS than water that comes directly out of the DI canister.

Brent F · #4 02-28-2008, 12:56 AM

Quote:

Originally Posted by Der_Iron_Chef

Correct. That's used if you're making drinking water, I believe....but water coming out of it will have a higher TDS than water that comes directly out of the DI canister.

That's right, the top canister is remove the smell from water we get in the spring and is intended for drinking water. I have mine running through that canister since my unit is built in under the sink in the kitchen and is also used for drinking water. The TDS are still 0 - 1.

digital-audiophile · #5 02-28-2008, 01:02 AM

hmm I think I just might have this figured out. I think I will put it under the basement batchroom sink becuase I might be able to get some tee adapters and then I can just run the drain into the furnace room.

sharuq1 · #6 02-28-2008, 03:41 PM

Can someone show a picture of how they put the tds meter on?

Is this plumbers dope stuff permanent? If so, will it still be possible to change the filters?

digital-audiophile · #7 03-10-2008, 05:46 PM

So I have no idea what I was fretting for. Getting this thing up and running really was super easy!

I skipped the whole piercing aspect of the installation and just got a tee adapter for under the sink. I just have the drain and the production line running through the wall into the utility room.

The thing is slow as heck though.. I expected a lot quicker output for it. Took almost two hours to make 5 gallons of water :O